On Wed, Oct 26, 2016 at 03:35:58PM -0400, Jon Mason wrote:
> Signed-off-by: Jon Mason <jon.ma...@broadcom.com>
> ---
> Documentation/devicetree/bindings/net/brcm,amac.txt | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt
> b/Documentation/devicetree/bindings/net/brcm,amac.txt
> index ba5ecc1..f92caee 100644
> --- a/Documentation/devicetree/bindings/net/brcm,amac.txt
> +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
> @@ -2,15 +2,18 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings
> -------------------------------------------------------------
>
> Required properties:
> - - compatible: "brcm,amac" or "brcm,nsp-amac"
> + - compatible: "brcm,amac", "brcm,nsp-amac", or "brcm,ns2-amac"
> - reg: Address and length of the GMAC registers,
> Address and length of the GMAC IDM registers
> + Address and length of the NIC Port Manager registers (optional)
> - reg-names: Names of the registers. Must have both "amac_base" and
> - "idm_base"
> + "idm_base". "nicpm_base" is optional (required for NS2)
> - interrupts: Interrupt number
>
> Optional properties:
> - mac-address: See ethernet.txt file in the same directory
> +- brcm,enet-phy-lane-swap:
> + boolean; Swap the PHY lanes (needed on some SKUs of NS2)
Maybe i'm missing something here, but the patch to the PHY swapped the
lanes. This seems to be a PHY property, not a MAC property. And it
swapped them unconditionally....
Andrew
