On Fri, Oct 28, 2016 at 04:56:55PM -0400, Jon Mason wrote:
> The BCM54810 PHY requires some semi-unique configuration, which results
> in some additional configuration in addition to the standard config.
> Also, some users of the BCM54810 require the PHY lanes to be swapped.
> Since there is no way to detect this, add a device tree query to see if
> it is applicable.
>
> Inspired-by: Vikas Soni <vs...@broadcom.com>
> Signed-off-by: Jon Mason <jon.ma...@broadcom.com>
> ---
> drivers/net/phy/Kconfig | 2 +-
> drivers/net/phy/broadcom.c | 58
> +++++++++++++++++++++++++++++++++++++++++++++-
> include/linux/brcmphy.h | 10 ++++++++
Hi Jon
The binding documentation is missing.
> + if (of_property_read_bool(np, "brcm,enet-phy-lane-swap")) {
> + /* Lane Swap - Undocumented register...magic! */
> + ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9,
> + 0x11B);
> + if (ret < 0)
> + return ret;
> + }
> +
I wounder if this property could be made generic? What exactly are you
swapping? Rx and Tx lanes? Maybe we should add it to phy.txt?
Andrew
