Re: [PATCH v2] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe()

[Lukasz Majewski]

Dear All,

> The commit a55944ca82d2 ("backlight: update bd state & fb_blank
> properties when necessary") has posed some extra restrictions on
> blanking and unblanking frame buffer device.
> 
> Unfortunately, pwm_bl driver's probe did not initialize members of
> struct backlight_device necessary for further blank/unblank operation.
> 
> This code in case of initial unblank of backlight device (default 
> behaviour) sets use_count to 1 and marks this particular backlight
> device as used by all available fb devices (since it is not known
> during probe how much and which fb devices will be assigned).
> 
> Without this code, the backlight works properly until one tries to
> blank it manually from sysfs with "echo 1
> > /sys/class/graphics/fb0/blank". Since fb_bl_on[0] and use_count
> > were both set to 0, the logic at
> fb_notifier_callback (@backlight.c) thought that we didn't turn on
> (unblanked) the backlight device and refuses to disable (blank) it.
> As a result we see garbage from fb displayed.

COmments/acks are more than welcome :-)

Best regards,
Łukasz Majewski

> 
> Signed-off-by: Lukasz Majewski <l.majew...@majess.pl>
> ---
> The patch has been tested on i.MX6q with 4.9-rc3
> SHA1: a909d3e636995ba7c349e2ca5dbb528154d4ac30
> ---
> Changes for v2:
> - Update commit message with proper other commit reference
> 
> ---
>  drivers/video/backlight/pwm_bl.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/backlight/pwm_bl.c
> b/drivers/video/backlight/pwm_bl.c index 1261400..6859ba0 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct
> platform_device *pdev) struct pwm_bl_data *pb;
>       int initial_blank = FB_BLANK_UNBLANK;
>       struct pwm_args pargs;
> -     int ret;
> +     int ret, i;
>  
>       if (!data) {
>               ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
> @@ -348,6 +348,14 @@ static int pwm_backlight_probe(struct
> platform_device *pdev) 
>       bl->props.brightness = data->dft_brightness;
>       bl->props.power = initial_blank;
> +
> +     if (initial_blank == FB_BLANK_UNBLANK) {
> +             for (i = 0; i < FB_MAX; i++)
> +                     bl->fb_bl_on[i] = true;
> +
> +             bl->use_count = 1;
> +     }
> +
>       backlight_update_status(bl);
>  
>       platform_set_drvdata(pdev, bl);

pgp4bclkifi72.pgp
Description: OpenPGP digital signature