On 11/02/2016 08:38 AM, Ksenija Stanojevic wrote: > Add core files for low resolution analog-to-digital converter (mxs-lradc) > MFD driver. > > Signed-off-by: Ksenija Stanojevic <[email protected]> > --- > Changes in v9: > - improve commit message. > > Changes in v8: > - rebase onto 4.9-rc1 > > Changes in v7: > - define macros ADC_CELL and TSC_CELL > - remove one cell and dynamically set them in the switch() > - fail in the touchscreen driver instead of mfd driver if > hardware doesn't contain a touchscreen > > Changes in v6: > - update copyright > - add kernel-doc header for struct mxs-lradc > - add error message > - change EINVAL to ENODEV > - use PLATFORM_DEVID_NONE instead -1 > - cosmetic fixes > > Changes in v5: > - use DEFINE_RES_MEM > - don't pass ioreammaped adress to platform cells > - move comment outside of struct mxs_lradc > - change type of argument in mxs_lradc_reg_set, mxs_lradc_reg_clear, > mxs_lradc_reg_wrt (struct mxs_lradc * -> void __iomem *) > > Changes in v4: > - update copyright > - use DEFINE_RES_IRQ_NAMED > - remove mxs_lradc_add_device function > - use struct mfd_cell in static form > - improve spacing > - remove unnecessary comment > - remove platform_get_irq > - remove touch_ret and use ret instead > - rename use_touchscreen to touchscreen_wire > - use goto statements > - remove irq[13], irq_count and irq_name from struct mxs_lradc > - remove all defines from inside the struct definition > > Changes in v3: > - add note to commit message > - move switch statement into if(touch_ret == 0) branch > - add MODULE_AUTHOR > > Changes in v2: > - do not change spacing in Kconfig > - make struct mfd_cell part of struct mxs_lradc > - use switch instead of if in mxs_lradc_irq_mask > - use only necessary header files in mxs_lradc.h > - use devm_mfd_add_device > - use separate function to register mfd device > - change licence to GPL > - add copyright > > drivers/mfd/Kconfig | 17 +++ > drivers/mfd/Makefile | 1 + > drivers/mfd/mxs-lradc.c | 249 > ++++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/mxs-lradc.h | 203 ++++++++++++++++++++++++++++++++++ > 4 files changed, 470 insertions(+) > create mode 100644 drivers/mfd/mxs-lradc.c > create mode 100644 include/linux/mfd/mxs-lradc.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index c6df644..bdd88cf 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -326,6 +326,23 @@ config MFD_MC13XXX_I2C > help > Select this if your MC13xxx is connected via an I2C bus. > > +config MFD_MXS_LRADC > + tristate "Freescale i.MX23/i.MX28 LRADC" > + depends on ARCH_MXS || COMPILE_TEST > + select MFD_CORE > + select STMP_DEVICE > + help > + Say yes here to build support for the Low Resolution > + Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28 > + processors. This driver provides common support for accessing the > + device, additional drivers must be enabled in order to use the > + functionality of the device: > + mxs-lradc-adc for ADC readings > + mxs-lradc-ts for touchscreen support > + > + This driver can also be built as a module. If so, the module will be > + called mxs-lradc. > + > config MFD_MX25_TSADC > tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" > select REGMAP_MMIO > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 9834e66..057ca15 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -211,3 +211,4 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o > diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c > new file mode 100644 > index 0000000..ffc8f2e > --- /dev/null > +++ b/drivers/mfd/mxs-lradc.c > @@ -0,0 +1,249 @@ > +/* > + * Freescale MXS Low Resolution Analog-to-Digital Converter driver > + * > + * Copyright (c) 2012 DENX Software Engineering, GmbH. > + * Copyright (c) 2016 Ksenija Stanojevic <[email protected]> > + * > + * Authors: > + * Marek Vasut <[email protected]> > + * Ksenija Stanojevic <[email protected]> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/mfd/core.h> > +#include <linux/mfd/mxs-lradc.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#define MXS_LRADC_BASE 0x80050000
Just for my understanding, why is this hardware address hard-coded here? Shouldn't that be fetched from DT ? > +#define ADC_CELL 0 > +#define TSC_CELL 1 [...] -- Best regards, Marek Vasut
