On 2016/11/16 21:48, Rob Herring wrote:
> On Tue, Nov 15, 2016 at 08:41:32PM +0800, Jian Yuan wrote:
>> From: yuanjian <yuanjia...@hisilicon.com>
>>
>> Add PWM driver for the PWM controller found on HiSilicon BVT SOCs, like 
>> Hi3519V100, Hi3516CV300, etc.
> 
> Wrap your lines at ~72 chars.
> 
>> The PWM controller is primarily in charge of controlling P-Iris lens.
>>
>> Reviewed-by: Jiancheng Xue <xuejianch...@hisilicon.com>
>> Signed-off-by: Jian Yuan <yuanjia...@hisilicon.com>
>> ---
>> Change Log:
>> v4:
>> Add #pwm-cells in the bindings document.
>> v3:
>> fixed issues pointed by thierry.
>> Add PWM compatible string for Hi3519V100.
>> Implement .apply() function which support atomic, instead of 
>> .enable()/.disable()/.config().
>> v2:
>> The number of PWMs is change to be probeable based on the compatible string.
>>
>>  .../devicetree/bindings/pwm/pwm-hibvt.txt          |  23 ++
>>  drivers/pwm/Kconfig                                |   9 +
>>  drivers/pwm/Makefile                               |   1 +
>>  drivers/pwm/pwm-hibvt.c                            | 270 
>> +++++++++++++++++++++
>>  4 files changed, 303 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
>>  create mode 100644 drivers/pwm/pwm-hibvt.c
>>
>> diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt 
>> b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
>> new file mode 100644
>> index 0000000..609284f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
>> @@ -0,0 +1,23 @@
>> +Hisilicon PWM controller
>> +
>> +Required properties:
>> +-compatible: should contain one SoC specific compatible string and one 
>> generic compatible
> 
> ditto
> 
Ok.
>> +string "hisilicon, hibvt-pwm". The SoC specific strings supported including:
>> +    "hisilicon,hi3516cv300-pwm"
>> +    "hisilicon,hi3519v100-pwm"
>> +- reg: physical base address and length of the controller's registers.
>> +- clocks: phandle and clock specifier of the PWM reference clock.
>> +- resets: phandle and reset specifier for the PWM controller reset.
>> +- #pwm-cells: Should be 2. See pwm.txt in this directory for a description 
>> of
>> +  the cells format.
>> +
>> +Example:
>> +    pwm: pwm@12130000 {
>> +
>> +            compatible = "hisilicon,hi3516cv300-pwm", "hisilicon,hibvt-pwm";
>> +            compatible = "hisilicon,hi3519v100-pwm", "hisilicon,hibvt-pwm";
> 
> ??
> 
It had been removed in next patch v5. You can check it out.
With best wishes.
>> +            reg = <0x12130000 0x10000>;
>> +            clocks = <&crg_ctrl HI3516CV300_PWM_CLK>;
>> +            resets = <&crg_ctrl 0x38 0>;
>> +            #pwm-cells = <2>;
>> +    };
> 
> .
> 

Reply via email to