On Wed, Nov 16, 2016 at 05:37:32PM +0800, Chen-Yu Tsai wrote:
> If we attempt to read/write the TCON registers before the bus clock
> is enabled, those accesses get ignored.
>
> In practice this almost never occurs because U-boot had already enabled
> the bus clock as part of its firmware provided framebuffer (simplefb).
>
> Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
> Signed-off-by: Chen-Yu Tsai <[email protected]>
> ---
>
> I was looking around the DRM driver and noticed this sequence was off.
>
> ---
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index c6afb2448655..8c2db65ea229 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -506,16 +506,16 @@ static int sun4i_tcon_bind(struct device *dev, struct
> device *master,
> return ret;
> }
>
> - ret = sun4i_tcon_init_regmap(dev, tcon);
> + ret = sun4i_tcon_init_clocks(dev, tcon);
> if (ret) {
> - dev_err(dev, "Couldn't init our TCON regmap\n");
> + dev_err(dev, "Couldn't init our TCON clocks\n");
> goto err_assert_reset;
> }
>
> - ret = sun4i_tcon_init_clocks(dev, tcon);
> + ret = sun4i_tcon_init_regmap(dev, tcon);
> if (ret) {
> - dev_err(dev, "Couldn't init our TCON clocks\n");
> - goto err_assert_reset;
> + dev_err(dev, "Couldn't init our TCON regmap\n");
> + goto err_free_clocks;
> }That won't work either. sun4i_tcon_init_clocks requires the regmap to be enabled before it calls sun4i_dclk_create. Maybe we should just move that call outside of sun4i_tcon_init_clocks and put it directly into the bind then. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
