Make suggested checkpatch modification for CHECK: Logical continuations should be on the previous line
Signed-off-by: Walt Feasel <waltfea...@gmail.com> --- drivers/staging/emxx_udc/emxx_udc.c | 37 +++++++++++++++---------------------- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c index 409761a..de8f065 100644 --- a/drivers/staging/emxx_udc/emxx_udc.c +++ b/drivers/staging/emxx_udc/emxx_udc.c @@ -926,8 +926,8 @@ static int _nbu2ss_epn_out_pio( req->req.actual += result; - if ((req->req.actual == req->req.length) - || ((req->req.actual % ep->ep.maxpacket) != 0)) { + if ((req->req.actual == req->req.length) || + ((req->req.actual % ep->ep.maxpacket) != 0)) { result = 0; } @@ -953,9 +953,8 @@ static int _nbu2ss_epn_out_data( iBufSize = min((req->req.length - req->req.actual), data_size); - if ((ep->ep_type != USB_ENDPOINT_XFER_INT) - && (req->req.dma != 0) - && (iBufSize >= sizeof(u32))) { + if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) && + (iBufSize >= sizeof(u32))) { nret = _nbu2ss_out_dma(udc, req, num, iBufSize); } else { iBufSize = min_t(u32, iBufSize, ep->ep.maxpacket); @@ -996,8 +995,8 @@ static int _nbu2ss_epn_out_transfer( } } } else { - if ((req->req.actual == req->req.length) - || ((req->req.actual % ep->ep.maxpacket) != 0)) { + if ((req->req.actual == req->req.length) || + ((req->req.actual % ep->ep.maxpacket) != 0)) { result = 0; } } @@ -1166,9 +1165,8 @@ static int _nbu2ss_epn_in_data( num = ep->epnum - 1; - if ((ep->ep_type != USB_ENDPOINT_XFER_INT) - && (req->req.dma != 0) - && (data_size >= sizeof(u32))) { + if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) && + (data_size >= sizeof(u32))) { nret = _nbu2ss_in_dma(udc, ep, req, num, data_size); } else { data_size = min_t(u32, data_size, ep->ep.maxpacket); @@ -1577,8 +1575,7 @@ static int std_req_get_status(struct nbu2ss_udc *udc) u8 ep_adrs; int result = -EINVAL; - if ((udc->ctrl.wValue != 0x0000) - || (direction != USB_DIR_IN)) { + if ((udc->ctrl.wValue != 0x0000) || (direction != USB_DIR_IN)) { return result; } @@ -1891,9 +1888,8 @@ static inline void _nbu2ss_ep0_int(struct nbu2ss_udc *udc) break; case EP0_OUT_STATUS_PAHSE: - if ((status & STG_END_INT) - || (status & SETUP_INT) - || (status & EP0_OUT_NULL_INT)) { + if ((status & STG_END_INT) || (status & SETUP_INT) || + (status & EP0_OUT_NULL_INT)) { status &= ~(STG_END_INT | EP0_OUT_INT | EP0_OUT_NULL_INT); @@ -2537,8 +2533,8 @@ static int nbu2ss_ep_enable( } ep_type = usb_endpoint_type(desc); - if ((ep_type == USB_ENDPOINT_XFER_CONTROL) - || (ep_type == USB_ENDPOINT_XFER_ISOC)) { + if ((ep_type == USB_ENDPOINT_XFER_CONTROL) || + (ep_type == USB_ENDPOINT_XFER_ISOC)) { pr_err(" *** %s, bat bmAttributes\n", __func__); return -EINVAL; } @@ -2547,8 +2543,7 @@ static int nbu2ss_ep_enable( if (udc->vbus_active == 0) return -ESHUTDOWN; - if ((!udc->driver) - || (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) { dev_err(ep->udc->dev, " *** %s, udc !!\n", __func__); return -ESHUTDOWN; } @@ -2663,9 +2658,7 @@ static int nbu2ss_ep_queue( } req = container_of(_req, struct nbu2ss_req, req); - if (unlikely - (!_req->complete || !_req->buf - || !list_empty(&req->queue))) { + if (unlikely(!_req->complete || !_req->buf || !list_empty(&req->queue))) { if (!_req->complete) pr_err("udc: %s --- !_req->complete\n", __func__); -- 2.1.4