Hi Amitkumar, >>>> From: Amitkumar Karwar [mailto:akar...@marvell.com] >>>> Sent: Tuesday, October 18, 2016 6:27 PM >>>> To: linux-blueto...@vger.kernel.org >>>> Cc: mar...@holtmann.org; linux-kernel@vger.kernel.org; Cathy Luo; >>>> Nishant Sarmukadam; Ganapathi Bhat; Amitkumar Karwar >>>> Subject: [PATCH] btusb: fix zero BD address problem during stress >>>> test >>>> >>>> From: Ganapathi Bhat <gb...@marvell.com> >>>> >>>> We came across a corner case issue during reboot stress test in >> which >>>> hciconfig shows BD address is all zero. Reason is we don't get >>>> response for HCI RESET command during initialization >>>> >>>> The issue is tracked to a race where USB subsystem calls >>>> btusb_intr_complete() to deliver a data(NOOP frame) received on >>>> interrupt endpoint. HCI_RUNNING flag is not yet set by bluetooth >>>> subsystem. So we ignore that frame and return. >>>> >>>> As we missed to resubmit the buffer to interrupt endpoint in this >>>> case, we don't get response for BT reset command downloaded after >> this. >>>> >>>> This patch handles the corner case to resolve zero BD address >> problem. >>>> >>>> Signed-off-by: Ganapathi Bhat <gb...@marvell.com> >>>> Signed-off-by: Amitkumar Karwar <akar...@marvell.com> >>>> --- >>>> drivers/bluetooth/btusb.c | 5 +---- >>>> 1 file changed, 1 insertion(+), 4 deletions(-) >>>> >>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c >>>> index 811f9b9..b5596ac 100644 >>>> --- a/drivers/bluetooth/btusb.c >>>> +++ b/drivers/bluetooth/btusb.c >>>> @@ -607,10 +607,7 @@ static void btusb_intr_complete(struct urb >> *urb) >>>> BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb- >>>>> status, >>>> urb->actual_length); >>>> >>>> - if (!test_bit(HCI_RUNNING, &hdev->flags)) >>>> - return; >>>> - >>>> - if (urb->status == 0) { >>>> + if (urb->status == 0 && test_bit(HCI_RUNNING, &hdev->flags)) { >>>> hdev->stat.byte_rx += urb->actual_length; >>>> >>>> if (btusb_recv_intr(data, urb->transfer_buffer, >>> >>> Did you get a chance to check this? >>> Please let us know if you have any review comments. >> >> can you explain how this is correct and show me the HCI traces for >> this. >> > > I suppose HCI trace means hcidump logs here. As device hasn't yet > initialized, hcidump won't show anything. > We had added debug info in btusb driver to trace the data received on all USB > endpoints and also checked usbmon logs.
use btmon and it will show it. > Here is the sequence of events we observed in a corner case while running > stress test. > 1) Inside btusb_open() call ------ Thread 1 > 2) btusb_submit_intr_urb() submits the URB for receiving data on interrupt > endpoint ---- Thread 1 > 3) btusb_intr_complete() gets called to deliver NOP frame from HCI controller > ---- Thread 2 > 4) HCI_RUNNING isn't set yet. So we return from btusb_intr_complete() without > resubmitting the buffer --- Thread 2 > 5) Exit btusb_open() ---- Thread 1 > 6) "set_bit(HCI_RUNNING, &hdev->flags)" done by bluetooth core ---- Thread 1 > > Later HCI_RESET command gets timedout, as we haven't re-submitted buffer for > interrupt endpoint in step (4) above. > > Please find attached logs. usbmon log shows first frame received on interrupt > endpoint is NOP(Search for Marvell in log). > > Here is what bluetooth spec says about NOP frame. > > "To indicate to the Host that the Controller is ready to receive HCI command > packets, > the Controller generates a Command Status event with Status 0x00 and > Command_Opcode 0x0000, and the Num_HCI_Command_Packets event > parameter is set to 1 or more. Command_Opcode, 0x0000 is a NOP (No Operation)” So I wonder if we need to remove the HCI_RUNNING logic from the drivers. It is only left in a few USB drivers and I removed the rest and moved it into the core. I am not in favour of papering over this issue. I need to understand what is wrong. And actually HCI_RUNNING needs to be taken away from the drivers. So the question is if btusb.c still needs it or if that is just a leftover. Meaning is it protecting anything? Regards Marcel