As per USB specification, in the Suspend state, the status bit does
not change until the port is suspended. However, there may be a delay
in suspending a port if there is a transaction currently in progress
on the bus.
In the USBDR controller, the PORTSCx[SUSP] bit changes immediately when
the application sets it and not when the port is actually suspended
Workaround for this issue involves waiting for a minimum of 10ms to
allow the controller to go into SUSPEND state before proceeding ahead
Signed-off-by: Changming Huang <jerry.hu...@nxp.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehr...@nxp.com>
---
drivers/usb/host/ehci-fsl.c | 3 +++
drivers/usb/host/ehci-hub.c | 2 ++
drivers/usb/host/ehci.h | 6 ++++++
drivers/usb/host/fsl-mph-dr-of.c | 2 ++
include/linux/fsl_devices.h | 1 +
5 files changed, 14 insertions(+)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 9f5ffb6..91701cc 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -286,6 +286,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
if (pdata->has_fsl_erratum_a005275 == 1)
ehci->has_fsl_hs_errata = 1;
+ if (pdata->has_fsl_erratum_a005697 == 1)
+ ehci->has_fsl_susp_errata = 1;
+
if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
(pdata->operating_mode == FSL_USB2_DR_OTG))
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 74f62d6..86d154e 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -305,6 +305,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
USB_PORT_STAT_HIGH_SPEED)
fs_idle_delay = true;
ehci_writel(ehci, t2, reg);
+ if (ehci_has_fsl_susp_errata(ehci))
+ mdelay(10);
changed = 1;
}
}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 3f3b74a..7706e4a 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -219,6 +219,7 @@ struct ehci_hcd { /* one per controller */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */
+ unsigned has_fsl_susp_errata:1; /*Freescale SUSP quirk*/
unsigned big_endian_mmio:1;
unsigned big_endian_desc:1;
unsigned big_endian_capbase:1;
@@ -703,10 +704,15 @@ struct ehci_tt {
#if defined(CONFIG_PPC_85xx)
/* Some Freescale processors have an erratum (USB A-005275) in which
* incoming packets get corrupted in HS mode
+ * Some Freescale processors have an erratum (USB A-005697) in which
+ * we need to wait for 10ms for bus to fo into suspend mode after
+ * setting SUSP bit
*/
#define ehci_has_fsl_hs_errata(e) ((e)->has_fsl_hs_errata)
+#define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata)
#else
#define ehci_has_fsl_hs_errata(e) (0)
+#define ehci_has_fsl_susp_errata(e) (0)
#endif
/*
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index f07ccb2..e90ddb5 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -226,6 +226,8 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device
*ofdev)
of_property_read_bool(np, "fsl,usb-erratum-a007792");
pdata->has_fsl_erratum_a005275 =
of_property_read_bool(np, "fsl,usb-erratum-a005275");
+ pdata->has_fsl_erratum_a005697 =
+ of_property_read_bool(np, "fsl,usb_erratum-a005697");
/*
* Determine whether phy_clk_valid needs to be checked
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f291291..60cef82 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -100,6 +100,7 @@ struct fsl_usb2_platform_data {
unsigned already_suspended:1;
unsigned has_fsl_erratum_a007792:1;
unsigned has_fsl_erratum_a005275:1;
+ unsigned has_fsl_erratum_a005697:1;
unsigned check_phy_clk_valid:1;
/* register save area for suspend/resume */
--
1.7.9.5
