On Wed 16 Nov 05:22 PST 2016, Imran Khan wrote:
> The SoC info driver provides information such as Chip ID,
> Chip family, serial number and other such details about
> Qualcomm SoCs.
>
> Signed-off-by: Imran Khan <kim...@codeaurora.org>
> ---
> v4 --> v5:
> - Removed redundant function socinfo_print
>
> v3 --> v4:
> - Corrected makefile so that smem and socinfo are treated as one module
> - Moved the code snippet to get socinfo smem item into socinfo.c
> - Removed redundant use of socinfo major version as it is always zero
> - Removed unused enums
> - Removed redundant indirections
> - Use image_version object to store information about each entry in the
> smem image table
> - Replaced usage of snprintf with sprintf and scnprintf
> - Get the address of image version table at the beginning and setup
> image version attributes only if image version table is available
> - Do the same for platform_subtype
> - Make different type of image version objects read only or readable/
> writable depending on their types. For example apps image attributes
> can be modified via sysfs but the same can't be done for modem image
> - Show PMIC model in a human readable form rather than a numeric number
> - Avoid using table in single sysfs entry
> - Removed checkpatch warnings about S_IRUGO
>
> v2 --> v3:
> - Add support to toss soc information data into entropy pool
> - Since socinfo is rolled into smem driver, compile the
> relevant portion of socinfo driver with smem driver
>
> v1 --> v2:
> - Removed inclusion of system_misc.h
> - merged socinfo.h into socinfo.c
> - made platform type and subtype arrays static
> - replaced uint32_t with u32
> - made functions static to avoid exposing vendor specific interface
> - Replaced usage of IS_ERR_OR_NULL with IS_ERR.
> - Remove raw-id attribute usage as human readable soc-id will suffice here
> - Avoid using a separate platform driver for socinfo by rolling it into smem
> driver itself.
> The sysfs setup is being done in a separate file (socinfo.c)
> - Replaced macro BUILD_ID_LENGTH with SMEM_SOCINFO_BUILD_ID_LENGTH.
> - For failure cases where socinfo can not be read use a single dummy socinfo
> with error values.
> - Removed usage of early_machine_is_xxx.
>
>
> drivers/soc/qcom/Kconfig | 1 +
> drivers/soc/qcom/Makefile | 3 +-
> drivers/soc/qcom/smem.c | 5 +
> drivers/soc/qcom/socinfo.c | 989
> +++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 997 insertions(+), 1 deletion(-)
> create mode 100644 drivers/soc/qcom/socinfo.c
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 461b387..f89d34d 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -24,6 +24,7 @@ config QCOM_SMEM
> tristate "Qualcomm Shared Memory Manager (SMEM)"
> depends on ARCH_QCOM
> depends on HWSPINLOCK
> + select SOC_BUS
> help
> Say y here to enable support for the Qualcomm Shared Memory Manager.
> The driver provides an interface to items in a heap shared among all
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index fdd664e..438efec 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -2,7 +2,8 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
> obj-$(CONFIG_QCOM_PM) += spm.o
> obj-$(CONFIG_QCOM_SMD) += smd.o
> obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
> -obj-$(CONFIG_QCOM_SMEM) += smem.o
> +obj-$(CONFIG_QCOM_SMEM) += qcom_smem.o
> +qcom_smem-y := smem.o socinfo.o
> obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
> index 18ec52f..a57acfb0 100644
> --- a/drivers/soc/qcom/smem.c
> +++ b/drivers/soc/qcom/smem.c
> @@ -85,6 +85,9 @@
> /* Max number of processors/hosts in a system */
> #define SMEM_HOST_COUNT 9
>
> +
> +extern int qcom_socinfo_init(struct platform_device *pdev);
> +
> /**
> * struct smem_proc_comm - proc_comm communication struct (legacy)
> * @command: current command to be executed
> @@ -751,6 +754,8 @@ static int qcom_smem_probe(struct platform_device *pdev)
>
> __smem = smem;
>
> + qcom_socinfo_init(pdev);
> +
> return 0;
> }
>
> diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
> new file mode 100644
> index 0000000..eca46df
> --- /dev/null
> +++ b/drivers/soc/qcom/socinfo.c
> @@ -0,0 +1,989 @@
> +/*
> + * Copyright (c) 2009-2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/export.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/sys_soc.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +#include <linux/random.h>
> +#include <linux/soc/qcom/smem.h>
> +
> +#define PMIC_MODEL_UNKNOWN 0
> +#define HW_PLATFORM_QRD 11
> +#define PLATFORM_SUBTYPE_QRD_INVALID 6
> +#define PLATFORM_SUBTYPE_INVALID 4
> +/*
> + * SOC version type with major number in the upper 16 bits and minor
> + * number in the lower 16 bits. For example:
> + * 1.0 -> 0x00010000
> + * 2.3 -> 0x00020003
> + */
> +#define SOC_VERSION_MAJOR(ver) (((ver) & 0xffff0000) >> 16)
> +#define SOC_VERSION_MINOR(ver) ((ver) & 0x0000ffff)
> +#define SOCINFO_FORMAT(x) (x)
> +#define SOCINFO_VERSION_MAJOR SOC_VERSION_MAJOR
> +#define SOCINFO_VERSION_MINOR SOC_VERSION_MINOR
> +
> +#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
> +#define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
> +#define SMEM_IMAGE_VERSION_SIZE 4096
> +#define SMEM_IMAGE_VERSION_NAME_SIZE 75
> +#define SMEM_IMAGE_VERSION_VARIANT_SIZE 20
> +#define SMEM_IMAGE_VERSION_OEM_SIZE 32
> +#define SMEM_IMAGE_VERSION_PARTITION_APPS 10
Please indent the values evenly, making this slightly easier to read.
> +
> +/*
> + * Shared memory identifiers, used to acquire handles to respective memory
> + * region.
> + */
> +#define SMEM_IMAGE_VERSION_TABLE 469
> +
> +/*
> + * Shared memory identifiers, used to acquire handles to respective memory
> + * region.
> + */
Duplicating this comment doesn't add value, please just drop this second
copy and replace the above comment with something like "SMEM item ids"
> +#define SMEM_HW_SW_BUILD_ID 137
> +
> +/*
> + * SMEM Image table indices
> + */
> +enum smem_image_table_index {
> + SMEM_IMAGE_TABLE_BOOT_INDEX = 0,
> + SMEM_IMAGE_TABLE_TZ_INDEX,
> + SMEM_IMAGE_TABLE_RPM_INDEX = 3,
> + SMEM_IMAGE_TABLE_APPS_INDEX = 10,
> + SMEM_IMAGE_TABLE_MPSS_INDEX,
> + SMEM_IMAGE_TABLE_ADSP_INDEX,
> + SMEM_IMAGE_TABLE_CNSS_INDEX,
> + SMEM_IMAGE_TABLE_VIDEO_INDEX
> +};
> +
> +#define SMEM_IMAGE_TABLE_ATTR(type, index) \
> +static ssize_t
> \
> +qcom_get_##type##_image_version(struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_version(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_set_##type##_image_version(struct device *dev, \
> + struct device_attribute *attr, \
> + const char *buf, \
> + size_t count) \
> +{ \
> + return qcom_set_image_version(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_get_##type##_image_variant(struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_variant(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_set_##type##_image_variant(struct device *dev, \
> + struct device_attribute *attr, \
> + const char *buf, \
> + size_t count) \
> +{ \
> + return qcom_set_image_variant(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_get_##type##_image_crm_version(struct device *dev,
> \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_crm_version(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_set_##type##_image_crm_version(struct device *dev,
> \
> + struct device_attribute *attr, \
> + const char *buf, \
> + size_t count) \
> +{ \
> + return qcom_set_image_crm_version(index, buf); \
> +} \
> +DEVICE_ATTR(type##_image_version, 0644, qcom_get_##type##_image_version,\
> + qcom_set_##type##_image_version); \
> +DEVICE_ATTR(type##_image_variant, 0644, qcom_get_##type##_image_variant,\
> + qcom_set_##type##_image_variant); \
> +DEVICE_ATTR(type##_image_crm_version, 0644, \
> + qcom_get_##type##_image_crm_version, \
> + qcom_set_##type##_image_crm_version); \
> +static struct attribute *type##_image_attrs[] = { \
> + &dev_attr_##type##_image_version.attr, \
> + &dev_attr_##type##_image_variant.attr, \
> + &dev_attr_##type##_image_crm_version.attr, \
> + NULL, \
> +}; \
> +static struct attribute_group type##_image_attr_group = { \
> + .attrs = type##_image_attrs, \
> +}
> +
> +#define SMEM_IMAGE_TABLE_RO_ATTR(type, index)
> \
> +static ssize_t
> \
> +qcom_get_##type##_image_version(struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_version(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_get_##type##_image_variant(struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_variant(index, buf); \
> +} \
> +static ssize_t
> \
> +qcom_get_##type##_image_crm_version(struct device *dev,
> \
> + struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + return qcom_get_image_crm_version(index, buf); \
> +} \
> +DEVICE_ATTR(type##_image_version, 0444, qcom_get_##type##_image_version,\
> + NULL); \
> +DEVICE_ATTR(type##_image_variant, 0444, qcom_get_##type##_image_variant,\
> + NULL); \
> +DEVICE_ATTR(type##_image_crm_version, 0444, \
> + qcom_get_##type##_image_crm_version, \
> + NULL); \
> +static struct attribute *type##_image_attrs[] = { \
> + &dev_attr_##type##_image_version.attr, \
> + &dev_attr_##type##_image_variant.attr, \
> + &dev_attr_##type##_image_crm_version.attr, \
> + NULL, \
> + }; \
> +static struct attribute_group type##_image_attr_group = { \
> + .attrs = type##_image_attrs, \
> +}
Rather than having this based on two huge macros take a look at
DEVICE_INT_ATTR() and struct dev_ext_attribute in
include/linux/device.h. It looks like if you just put the index in a
struct and use container_of to reach that you can replace these with
direct functions.
Also, it's perfectly fine to always specify a store operation and use
0444 vs 0644 to control it's availability. So you don't need two sets if
you just expose the mode in your macro.
> +
> +/*
> + * Qcom SoC types
> + */
> +enum qcom_cpu {
> + MSM_CPU_UNKNOWN = 0,
> + MSM_CPU_8960,
> + MSM_CPU_8960AB,
> + MSM_CPU_8064,
> + MSM_CPU_8974,
> + MSM_CPU_8974PRO_AA,
> + MSM_CPU_8974PRO_AB,
> + MSM_CPU_8974PRO_AC,
> + MSM_CPU_8916,
> + MSM_CPU_8084,
> + MSM_CPU_8996
> +};
These are now "unused" (per below comment).
> +
> +struct qcom_soc_info {
> + enum qcom_cpu generic_soc_type;
This enum is no longer used, seems like you can turn cpu_of_id into a
simple char *[] array with with soc_id_string indexed by id.
> + char *soc_id_string;
> +};
> +
> +/* Hardware platform types */
> +static const char *hw_platform[] = {
> + [0] = "Unknown",
> + [1] = "Surf",
> + [2] = "FFA",
> + [3] = "Fluid",
> + [4] = "SVLTE_FFA",
> + [5] = "SLVTE_SURF",
> + [7] = "MDM_MTP_NO_DISPLAY",
> + [8] = "MTP",
> + [9] = "Liquid",
> + [10] = "Dragon",
> + [11] = "QRD",
> + [13] = "HRD",
> + [14] = "DTV",
> + [21] = "RCM",
> + [23] = "STP",
> + [24] = "SBC",
> +};
> +
> +static const char *qrd_hw_platform_subtype[] = {
> + [0] = "QRD",
> + [1] = "SKUAA",
> + [2] = "SKUF",
> + [3] = "SKUAB",
> + [5] = "SKUG",
> + [6] = "INVALID",
> +};
> +
> +static const char *hw_platform_subtype[] = {
> + "Unknown", "charm", "strange", "strange_2a", "Invalid",
> +};
> +
> +static const char *pmic_model[] = {
> + [0] = "Unknown PMIC model",
> + [13] = "PMIC model: PM8058",
> + [14] = "PMIC model: PM8028",
> + [15] = "PMIC model: PM8901",
> + [16] = "PMIC model: PM8027",
> + [17] = "PMIC model: ISL9519",
> + [18] = "PMIC model: PM8921",
> + [19] = "PMIC model: PM8018",
> + [20] = "PMIC model: PM8015",
> + [21] = "PMIC model: PM8014",
> + [22] = "PMIC model: PM8821",
> + [23] = "PMIC model: PM8038",
> + [24] = "PMIC model: PM8922",
> + [25] = "PMIC model: PM8917",
> +};
> +
> +struct smem_image_version {
> + char name[SMEM_IMAGE_VERSION_NAME_SIZE];
> + char variant[SMEM_IMAGE_VERSION_VARIANT_SIZE];
> + char pad;
> + char oem[SMEM_IMAGE_VERSION_OEM_SIZE];
> +};
> +
> +/* Used to parse shared memory. Must match the modem. */
> +struct socinfo_v0_1 {
> + u32 format;
> + u32 id;
> + u32 version;
> + char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
> +};
> +
> +struct socinfo_v0_2 {
> + struct socinfo_v0_1 v0_1;
> + u32 raw_version;
> +};
> +
> +struct socinfo_v0_3 {
> + struct socinfo_v0_2 v0_2;
> + u32 hw_platform;
> +};
> +
> +struct socinfo_v0_4 {
> + struct socinfo_v0_3 v0_3;
> + u32 platform_version;
> +};
> +
> +struct socinfo_v0_5 {
> + struct socinfo_v0_4 v0_4;
> + u32 accessory_chip;
> +};
> +
> +struct socinfo_v0_6 {
> + struct socinfo_v0_5 v0_5;
> + u32 hw_platform_subtype;
> +};
> +
> +struct socinfo_v0_7 {
> + struct socinfo_v0_6 v0_6;
> + u32 pmic_model;
> + u32 pmic_die_revision;
> +};
> +
> +struct socinfo_v0_8 {
> + struct socinfo_v0_7 v0_7;
> + u32 pmic_model_1;
> + u32 pmic_die_revision_1;
> + u32 pmic_model_2;
> + u32 pmic_die_revision_2;
> +};
> +
> +struct socinfo_v0_9 {
> + struct socinfo_v0_8 v0_8;
> + u32 foundry_id;
> +};
> +
> +struct socinfo_v0_10 {
> + struct socinfo_v0_9 v0_9;
> + u32 serial_number;
> +};
> +
> +struct socinfo_v0_11 {
> + struct socinfo_v0_10 v0_10;
> + u32 num_pmics;
> + u32 pmic_array_offset;
> +};
> +
> +struct socinfo_v0_12 {
> + struct socinfo_v0_11 v0_11;
> + u32 chip_family;
> + u32 raw_device_family;
> + u32 raw_device_number;
> +};
> +
> +static union {
> + struct socinfo_v0_1 v0_1;
> + struct socinfo_v0_2 v0_2;
> + struct socinfo_v0_3 v0_3;
> + struct socinfo_v0_4 v0_4;
> + struct socinfo_v0_5 v0_5;
> + struct socinfo_v0_6 v0_6;
> + struct socinfo_v0_7 v0_7;
> + struct socinfo_v0_8 v0_8;
> + struct socinfo_v0_9 v0_9;
> + struct socinfo_v0_10 v0_10;
> + struct socinfo_v0_11 v0_11;
> + struct socinfo_v0_12 v0_12;
> +} *socinfo;
> +
> +static struct smem_image_version *smem_image_version;
> +static bool smem_img_tbl_avlbl = true;
You don't need to keep track of this separately, just test if
smem_image_version is NULL or not (reset it to NULL if qcom_smem_get()
fails).
> +static bool hw_subtype_valid = true;
> +static u32 hw_subtype;
Don't keep track of this in a global variable, it's perfectly fine to
figure it out in qcom_get_platform_subtype()
> +
> +
> +/* max socinfo format version supported */
> +#define MAX_SOCINFO_FORMAT SOCINFO_FORMAT(12)
It's fine to drop SOCINFO_FORMAT and just put 12 here.
> +
> +static struct qcom_soc_info cpu_of_id[] = {
> +
> + [0] = {MSM_CPU_UNKNOWN, "Unknown CPU"},
> +
> + /* 8x60 IDs */
> + [87] = {MSM_CPU_8960, "MSM8960"},
> +
> + /* 8x64 IDs */
> + [109] = {MSM_CPU_8064, "APQ8064"},
> + [130] = {MSM_CPU_8064, "MPQ8064"},
> +
> + /* 8x60A IDs */
> + [122] = {MSM_CPU_8960, "MSM8660A"},
> + [123] = {MSM_CPU_8960, "MSM8260A"},
> + [124] = {MSM_CPU_8960, "APQ8060A"},
> +
> + /* 8x74 IDs */
> + [126] = {MSM_CPU_8974, "MSM8974"},
> + [184] = {MSM_CPU_8974, "APQ8074"},
> + [185] = {MSM_CPU_8974, "MSM8274"},
> + [186] = {MSM_CPU_8974, "MSM8674"},
> +
> + /* 8x74AA IDs */
> + [208] = {MSM_CPU_8974PRO_AA, "APQ8074-AA"},
> + [211] = {MSM_CPU_8974PRO_AA, "MSM8274-AA"},
> + [214] = {MSM_CPU_8974PRO_AA, "MSM8674-AA"},
> + [217] = {MSM_CPU_8974PRO_AA, "MSM8974-AA"},
> +
> + /* 8x74AB IDs */
> + [209] = {MSM_CPU_8974PRO_AB, "APQ8074-AB"},
> + [212] = {MSM_CPU_8974PRO_AB, "MSM8274-AB"},
> + [215] = {MSM_CPU_8974PRO_AB, "MSM8674-AB"},
> + [218] = {MSM_CPU_8974PRO_AB, "MSM8974-AB"},
> +
> + /* 8x74AC IDs */
> + [194] = {MSM_CPU_8974PRO_AC, "MSM8974PRO"},
> + [210] = {MSM_CPU_8974PRO_AC, "APQ8074PRO"},
> + [213] = {MSM_CPU_8974PRO_AC, "MSM8274PRO"},
> + [216] = {MSM_CPU_8974PRO_AC, "MSM8674PRO"},
> +
> + /* 8x60AB IDs */
> + [138] = {MSM_CPU_8960AB, "MSM8960AB"},
> + [139] = {MSM_CPU_8960AB, "APQ8060AB"},
> + [140] = {MSM_CPU_8960AB, "MSM8260AB"},
> + [141] = {MSM_CPU_8960AB, "MSM8660AB"},
> +
> + /* 8x84 IDs */
> + [178] = {MSM_CPU_8084, "APQ8084"},
> +
> + /* 8x16 IDs */
> + [206] = {MSM_CPU_8916, "MSM8916"},
> + [247] = {MSM_CPU_8916, "APQ8016"},
> + [248] = {MSM_CPU_8916, "MSM8216"},
> + [249] = {MSM_CPU_8916, "MSM8116"},
> + [250] = {MSM_CPU_8916, "MSM8616"},
> +
> + /* 8x96 IDs */
> + [246] = {MSM_CPU_8996, "MSM8996"},
> + [310] = {MSM_CPU_8996, "MSM8996AU"},
> + [311] = {MSM_CPU_8996, "APQ8096AU"},
> + [291] = {MSM_CPU_8996, "APQ8096"},
> + [305] = {MSM_CPU_8996, "MSM8996SG"},
> + [312] = {MSM_CPU_8996, "APQ8096SG"},
> +
> + /*
> + * Uninitialized IDs are not known to run Linux.
> + * MSM_CPU_UNKNOWN is set to 0 to ensure these IDs are
> + * considered as unknown CPU.
> + */
> +};
> +
> +static u32 socinfo_format;
> +
> +static u32 socinfo_get_id(void);
> +
Merge socinfo_init_sysfs() and qcom_socinfo_init() into one function and
you don't need to declare this here.
> +/* socinfo: sysfs functions */
> +
> +static char *socinfo_get_id_string(void)
> +{
> + return (socinfo) ? cpu_of_id[socinfo->v0_1.id].soc_id_string : NULL;
socinfo can't be NULL anymore.
> +}
> +
> +static char *socinfo_get_image_version_base_address(struct device *dev)
Inline this into qcom_socinfo_init() as described below.
> +{
> + size_t size, size_in;
> + void *ptr;
> +
> + ptr = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_IMAGE_VERSION_TABLE,
> + &size);
> + if (IS_ERR(ptr))
> + return ptr;
> +
> + size_in = SMEM_IMAGE_VERSION_SIZE;
> + if (size_in != size) {
> + dev_err(dev, "Wrong size for smem item\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return ptr;
> +}
> +
> +
> +static u32 socinfo_get_version(void)
> +{
> + return (socinfo) ? socinfo->v0_1.version : 0;
socinfo can't be NULL, so you can just inline "socinfo->v0_1.version" in
the one place calling this.
> +}
> +
> +static char *socinfo_get_build_id(void)
> +{
> + return (socinfo) ? socinfo->v0_1.build_id : NULL;
socinfo can't be NULL, and this is only called from one place, so inline
"socinfo->v0_1.build_id" there.
> +}
> +
> +static u32 socinfo_get_raw_version(void)
> +{
> + return socinfo ?
socinfo can't be NULL.
> + (socinfo_format >= SOCINFO_FORMAT(2) ?
qcom_soc_attr_raw_version will not be created unless socinfo_format >=
2, so this can't be called if socinfo_format < 2, so you don't need this
extra check.
> + socinfo->v0_2.raw_version : 0)
> + : 0;
And as this is then simplified to "return socinfo->v0_2.raw_version;" I
think you should just inline it in the one place calling this function.
> +}
> +
> +static u32 socinfo_get_platform_type(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(3) ?
> + socinfo->v0_3.hw_platform : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_platform_version(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(4) ?
> + socinfo->v0_4.platform_version : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_platform_subtype(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(6) ?
> + socinfo->v0_6.hw_platform_subtype : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_serial_number(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(10) ?
> + socinfo->v0_10.serial_number : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_pmic_model(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(7) ?
> + socinfo->v0_7.pmic_model : PMIC_MODEL_UNKNOWN)
> + : PMIC_MODEL_UNKNOWN;
> +}
> +
> +static u32 socinfo_get_pmic_die_revision(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_FORMAT(7) ?
> + socinfo->v0_7.pmic_die_revision : 0)
> + : 0;
> +}
> +
> +
> +static ssize_t
> +qcom_get_vendor(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%s", "Qualcomm\n");
> +}
> +
> +static ssize_t
> +qcom_get_raw_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
This is the "show" function of an attr, so please drop the "get" and add
"_show".
> +{
> + return sprintf(buf, "%u\n",
> + socinfo_get_raw_version());
And please inline as much as you can of these, there's little point in
having a helper function to wrap a single line accessing the element in
the socinfo struct.
> +}
> +
> +static ssize_t
> +qcom_get_build_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return scnprintf(buf, SMEM_SOCINFO_BUILD_ID_LENGTH, "%s\n",
> + socinfo_get_build_id());
> +}
> +
> +static ssize_t
> +qcom_get_hw_platform(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 hw_type;
> +
> + hw_type = socinfo_get_platform_type();
> +
> + return sprintf(buf, "%s\n", hw_platform[hw_type]);
> +}
> +
> +static ssize_t
> +qcom_get_platform_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%u\n", socinfo_get_platform_version());
> +}
> +
> +static ssize_t
> +qcom_get_accessory_chip(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 acc_chip = socinfo ? (socinfo_format >= SOCINFO_FORMAT(5) ?
> + socinfo->v0_5.accessory_chip : 0) : 0;
> + return sprintf(buf, "%u\n", acc_chip);
> +}
> +
> +static ssize_t
> +qcom_get_platform_subtype(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + if (socinfo_get_platform_type() == HW_PLATFORM_QRD) {
> + return sprintf(buf, "%s\n",
> + qrd_hw_platform_subtype[hw_subtype]);
> + } else {
> + return sprintf(buf, "%s\n",
> + hw_platform_subtype[hw_subtype]);
> + }
> +}
> +
> +static ssize_t
> +qcom_get_platform_subtype_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%u\n", socinfo_get_platform_subtype());
> +}
> +
> +static ssize_t
> +qcom_get_foundry_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 foundry_id = socinfo ? (socinfo_format >= SOCINFO_FORMAT(9) ?
> + socinfo->v0_9.foundry_id : 0) : 0;
> + return sprintf(buf, "%u\n", foundry_id);
> +}
> +
> +static ssize_t
> +qcom_get_serial_number(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%u\n", socinfo_get_serial_number());
> +}
> +
> +static ssize_t
> +qcom_get_chip_family(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 chip_family = socinfo ? (socinfo_format >= SOCINFO_FORMAT(12) ?
> + socinfo->v0_12.chip_family : 0) : 0;
> + return sprintf(buf, "0x%x\n", chip_family);
> +}
> +
> +static ssize_t
> +qcom_get_raw_device_family(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 raw_dev_fam = socinfo ? (socinfo_format >= SOCINFO_FORMAT(12) ?
> + socinfo->v0_12.raw_device_family : 0) : 0;
> + return sprintf(buf, "0x%x\n", raw_dev_fam);
> +}
> +
> +static ssize_t
> +qcom_get_raw_device_number(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 raw_dev_num = socinfo ? (socinfo_format >= SOCINFO_FORMAT(12) ?
> + socinfo->v0_12.raw_device_number : 0) : 0;
> + return sprintf(buf, "0x%x\n", raw_dev_num);
> +}
> +
> +static ssize_t
> +qcom_get_pmic_model(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 pmic_id = socinfo_get_pmic_model();
> +
> + return sprintf(buf, "%s\n", pmic_model[pmic_id]);
> +}
> +
> +static ssize_t
> +qcom_get_pmic_die_revision(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%u\n", socinfo_get_pmic_die_revision());
> +}
> +
> +static ssize_t
> +qcom_get_image_version(int index, char *buf)
> +{
Just inline these into the version show() and store() functions. And
whenever you copy to the sysfs buffer, it's of size PAGE_SIZE.
> + return scnprintf(buf, SMEM_IMAGE_VERSION_NAME_SIZE, "%s\n",
> + smem_image_version[index].name);
> +}
> +
> +static ssize_t
> +qcom_set_image_version(int index, const char *buf)
> +{
> + return strlcpy(smem_image_version[index].name, buf,
> + SMEM_IMAGE_VERSION_NAME_SIZE);
> +}
> +
> +static ssize_t
> +qcom_get_image_variant(int index, char *buf)
> +{
> + return scnprintf(buf, SMEM_IMAGE_VERSION_VARIANT_SIZE, "%s\n",
> + smem_image_version[index].variant);
> +}
> +
> +static ssize_t
> +qcom_set_image_variant(int index, const char *buf)
> +{
> + return strlcpy(smem_image_version[index].variant, buf,
> + SMEM_IMAGE_VERSION_VARIANT_SIZE);
> +}
> +
> +static ssize_t
> +qcom_get_image_crm_version(int index, char *buf)
> +{
> + return scnprintf(buf, SMEM_IMAGE_VERSION_OEM_SIZE, "%s\n",
> + smem_image_version[index].oem);
> +}
> +
> +static ssize_t
> +qcom_set_image_crm_version(int index, const char *buf)
> +{
> + return strlcpy(smem_image_version[index].oem, buf,
> + SMEM_IMAGE_VERSION_OEM_SIZE);
> +}
> +
> +static struct device_attribute qcom_soc_attr_raw_version =
> + __ATTR(raw_version, 0444, qcom_get_raw_version, NULL);
Rather than writing all these out here you can put them in an array of:
struct qcom_socinfo_attr {
struct device_attribute attr;
int min_version;
};
#define QCOM_SOCINFO_ATTR(_name, _show, _min_version) \
{ __ATTR(_name, 0444, _show, NULL), _min_version) }
static const struct qcom_socinfo_attr qcom_socinfo_attrs[] = {
QCOM_SOCINFO_ATTR(raw_version, qcom_get_raw_version, 2),
};
And then socinfo_populate_sysfs_files() will be a matter of looping over
this array and comparing min_version and registering the attr.
> +
> +static struct device_attribute qcom_soc_attr_vendor =
> + __ATTR(vendor, 0444, qcom_get_vendor, NULL);
> +
> +static struct device_attribute qcom_soc_attr_build_id =
> + __ATTR(build_id, 0444, qcom_get_build_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_hw_platform =
> + __ATTR(hw_platform, 0444, qcom_get_hw_platform, NULL);
> +
> +
> +static struct device_attribute qcom_soc_attr_platform_version =
> + __ATTR(platform_version, 0444,
> + qcom_get_platform_version, NULL);
> +
> +static struct device_attribute qcom_soc_attr_accessory_chip =
> + __ATTR(accessory_chip, 0444,
> + qcom_get_accessory_chip, NULL);
> +
> +static struct device_attribute qcom_soc_attr_platform_subtype =
> + __ATTR(platform_subtype, 0444,
> + qcom_get_platform_subtype, NULL);
> +
> +static struct device_attribute qcom_soc_attr_platform_subtype_id =
> + __ATTR(platform_subtype_id, 0444,
> + qcom_get_platform_subtype_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_foundry_id =
> + __ATTR(foundry_id, 0444,
> + qcom_get_foundry_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_serial_number =
> + __ATTR(serial_number, 0444,
> + qcom_get_serial_number, NULL);
> +
> +static struct device_attribute qcom_soc_attr_chip_family =
> + __ATTR(chip_family, 0444,
> + qcom_get_chip_family, NULL);
> +
> +static struct device_attribute qcom_soc_attr_raw_device_family =
> + __ATTR(raw_device_family, 0444,
> + qcom_get_raw_device_family, NULL);
> +
> +static struct device_attribute qcom_soc_attr_raw_device_number =
> + __ATTR(raw_device_number, 0444,
> + qcom_get_raw_device_number, NULL);
> +
> +static struct device_attribute qcom_soc_attr_pmic_model =
> + __ATTR(pmic_model, 0444,
> + qcom_get_pmic_model, NULL);
> +
> +static struct device_attribute qcom_soc_attr_pmic_die_revision =
> + __ATTR(pmic_die_revision, 0444,
> + qcom_get_pmic_die_revision, NULL);
> +
> +SMEM_IMAGE_TABLE_RO_ATTR(boot, SMEM_IMAGE_TABLE_BOOT_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(tz, SMEM_IMAGE_TABLE_TZ_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(rpm, SMEM_IMAGE_TABLE_RPM_INDEX);
> +SMEM_IMAGE_TABLE_ATTR(apps, SMEM_IMAGE_TABLE_APPS_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(mpss, SMEM_IMAGE_TABLE_MPSS_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(adsp, SMEM_IMAGE_TABLE_ADSP_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(cnss, SMEM_IMAGE_TABLE_CNSS_INDEX);
> +SMEM_IMAGE_TABLE_RO_ATTR(video, SMEM_IMAGE_TABLE_VIDEO_INDEX);
> +
> +static struct attribute_group
> + *smem_image_table[SMEM_IMAGE_VERSION_BLOCKS_COUNT] = {
> + [SMEM_IMAGE_TABLE_BOOT_INDEX] = &boot_image_attr_group,
> + [SMEM_IMAGE_TABLE_TZ_INDEX] = &tz_image_attr_group,
> + [SMEM_IMAGE_TABLE_RPM_INDEX] = &rpm_image_attr_group,
> + [SMEM_IMAGE_TABLE_APPS_INDEX] = &apps_image_attr_group,
> + [SMEM_IMAGE_TABLE_MPSS_INDEX] = &mpss_image_attr_group,
> + [SMEM_IMAGE_TABLE_ADSP_INDEX] = &adsp_image_attr_group,
> + [SMEM_IMAGE_TABLE_CNSS_INDEX] = &cnss_image_attr_group,
> + [SMEM_IMAGE_TABLE_VIDEO_INDEX] = &video_image_attr_group,
> +};
> +
> +static int socinfo_populate_sysfs_files(struct device *qcom_soc_device)
> +{
> + int err, img_idx;
> +
> + /*
> + * Expose SMEM_IMAGE_TABLE to sysfs only when we have IMAGE_TABLE
> + * available in SMEM. As IMAGE_TABLE and SOCINFO are two separate
> + * items within SMEM, we expose the remaining soc information(i.e
> + * only the SOCINFO item available in SMEM) to sysfs even in the
> + * absence of an IMAGE_TABLE.
> + */
> + if (smem_img_tbl_avlbl) {
> + for (img_idx = 0; img_idx < SMEM_IMAGE_VERSION_BLOCKS_COUNT;
> + img_idx++) {
> + if (smem_image_table[img_idx]) {
> + err = sysfs_create_group(&qcom_soc_device->kobj,
> + smem_image_table[img_idx]);
> + if (err)
> + break;
Should we just ignore this error?
> + }
> + }
> + }
> + err = device_create_file(qcom_soc_device, &qcom_soc_attr_vendor);
> + if (!err) {
Flip this conditional around and handle the error here, it saves you one
indentation level for the rest of this function.
> + switch (socinfo_format) {
> + case SOCINFO_FORMAT(12):
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_chip_family);
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_device_family);
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_device_number);
> + case SOCINFO_FORMAT(11):
> + case SOCINFO_FORMAT(10):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_serial_number);
> + case SOCINFO_FORMAT(9):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_foundry_id);
> + case SOCINFO_FORMAT(8):
> + case SOCINFO_FORMAT(7):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_pmic_model);
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_pmic_die_revision);
> + case SOCINFO_FORMAT(6):
> + if (hw_subtype_valid)
> + if (!err)
> + err = device_create_file(
> + qcom_soc_device,
> + &qcom_soc_attr_platform_subtype);
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_platform_subtype_id);
> + case SOCINFO_FORMAT(5):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_accessory_chip);
> + case SOCINFO_FORMAT(4):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_platform_version);
> + case SOCINFO_FORMAT(3):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_hw_platform);
> + case SOCINFO_FORMAT(2):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_version);
> + case SOCINFO_FORMAT(1):
> + if (!err)
> + err = device_create_file(qcom_soc_device,
> + &qcom_soc_attr_build_id);
> + if (err) {
> + dev_err(qcom_soc_device,
> + "Could not create sysfs entry\n");
> + return err;
> + }
> + return 0;
> + default:
> + dev_err(qcom_soc_device, "Unknown socinfo format:
> v0.%u\n",
> + SOCINFO_VERSION_MINOR(socinfo_format));
> + return -EINVAL;
> + }
> + } else {
> + dev_err(qcom_soc_device, "Could not create sysfs entry\n");
> + return err;
> + }
> +}
> +
> +static int socinfo_init_sysfs(struct device *dev)
This device * is specifically the smem device, so if you name it
"smem_dev"...
> +{
> + struct device *qcom_soc_device;
...then you can name this "dev" to shorten things.
> + struct soc_device *soc_dev;
> + struct soc_device_attribute *soc_dev_attr;
"attr" would be long enough.
> + u32 soc_version;
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_version = socinfo_get_version();
> +
> + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", socinfo_get_id());
> + soc_dev_attr->family = "Snapdragon";
> + soc_dev_attr->machine = socinfo_get_id_string();
Single use of socinfo_get_id_string() so you should just go:
unsigned int id = socinfo->v0_1.id;
and then use that for your soc_id print and use soc_id_string[id] here.
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u.%u",
> + SOC_VERSION_MAJOR(soc_version),
> + SOC_VERSION_MINOR(soc_version));
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + kfree(soc_dev_attr);
> + return PTR_ERR(soc_dev);
> + }
> +
> + qcom_soc_device = soc_device_to_device(soc_dev);
> + socinfo_populate_sysfs_files(qcom_soc_device);
> + return 0;
> +}
> +
> +static u32 socinfo_get_id(void)
> +{
> + return (socinfo) ? socinfo->v0_1.id : 0;
As we no longer expose the socinfo functions to external callers this
will only ever be called if socinfo_init() succeeded, so no need to
check for socinfo being NULL.
> +}
> +
> +static int socinfo_select_format(struct device *dev)
> +{
> + u32 f_maj = SOCINFO_VERSION_MAJOR(socinfo->v0_1.format);
> + u32 f_min = SOCINFO_VERSION_MINOR(socinfo->v0_1.format);
> +
> + if (f_maj != 0) {
> + dev_err(dev, "Unsupported format v%u.%u.\n",
> + f_maj, f_min);
> + return -EINVAL;
> + }
> +
> + if (socinfo->v0_1.format > MAX_SOCINFO_FORMAT) {
> + dev_warn(dev, "Unsupported format v%u.%u. Falling back to
> v%u.%u.\n",
> + f_maj, f_min, SOCINFO_VERSION_MAJOR(MAX_SOCINFO_FORMAT),
> + SOCINFO_VERSION_MINOR(MAX_SOCINFO_FORMAT));
> + socinfo_format = MAX_SOCINFO_FORMAT;
Don't fall back, just print an error and fail.
> + } else {
> + socinfo_format = socinfo->v0_1.format;
> + }
> + return 0;
> +}
> +
> +int qcom_socinfo_init(struct platform_device *pdev)
As smem doesn't care if we're failing here you can just have the return
type void.
> +{
> + size_t size;
> +
> + socinfo = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID,
> + &size);
> + if (IS_ERR(socinfo) || (socinfo_select_format(&pdev->dev) < 0)) {
> + dev_warn(&pdev->dev,
> + "Coudn't find soc information; Unable to setup
> socinfo.\n");
> + return -ENOMEM;
"Couldn't find socinfo" and return -ENOENT if IS_ERR(socinfo).
> + }
And then just move the rest of socinfo_select_format() here:
if (socinfo->v0.1.format > MAX_SOCINFO_FORMAT) {
dev_err(&pdev->dev, "Invalid socinfo version %d.%d\n",
MAJOR(), MINOR());
return -EINVAL;
}
> +
> + if (!socinfo_get_id()) {
> + dev_err(&pdev->dev, "socinfo: Unknown SoC ID!\n");
> + return -EINVAL;
> + }
> +
> + WARN(socinfo_get_id() >= ARRAY_SIZE(cpu_of_id),
> + "New IDs added! ID => CPU mapping needs an update.\n");
> +
> + smem_image_version = (struct smem_image_version *)
> + socinfo_get_image_version_base_address(&pdev->dev);
You could make socinfo_get_image_version_base_address() return void *
and you don't have to do the type cast. But you can make this more
compact by just inlining the qcom_smem_get() here directly.
smem_image_version = qcom_smem_get(QCOM_SMEM_HOST_ANY,
SMEM_IMAGE_VERSION_TABLE,
&size);
if (IS_ERR(smem_image_version) || size != SMEM_IMAGE_VERSION_SIZE) {
...
}
> + if (IS_ERR(smem_image_version)) {
> + dev_warn(&pdev->dev, "Unable to get address for image version
> table.\n");
"Image version table missing" should keep you < 80 characters.
> + smem_img_tbl_avlbl = false;
> + }
> +
> + hw_subtype = socinfo_get_platform_subtype();
> + if (socinfo_get_platform_type() == HW_PLATFORM_QRD) {
> + if (hw_subtype >= PLATFORM_SUBTYPE_QRD_INVALID) {
> + dev_err(&pdev->dev, "Invalid hardware platform sub type
> for qrd found\n");
> + hw_subtype_valid = false;
> + }
> + } else {
> + if (hw_subtype >= PLATFORM_SUBTYPE_INVALID) {
> + dev_err(&pdev->dev, "Invalid hardware platform
> subtype\n");
> + hw_subtype_valid = false;
> + }
> + }
This will only matter if format >= 6 and hw_subtype is outside the array
of strings, I think you should just be optimistic about this not being
an issue and then in all cases where you dereference a lookup table
check that you're within bounds, or fail with -EINVAL; to userspace.
> +
> + socinfo_init_sysfs(&pdev->dev);
socinfo_init_sysfs() is just the second half of this function, so inline
it here.
> +
> + /* Feed the soc specific unique data into entropy pool */
> + add_device_randomness(socinfo, size);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(qcom_socinfo_init);
> +
No empty lines at the end of the file, please.
Regards,
Bjorn
