The difference between a regular fixed regulator and a GPIO power load
switch is the fact that the latter may be controlled from user space.

Reuse the fixed regulator driver to support power switches.

Signed-off-by: Bartosz Golaszewski <[email protected]>
---
 drivers/regulator/fixed.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a747..f125a3e 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -31,6 +31,8 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
 
+#define REG_FIXED_POWER_SWITCH         BIT(0)
+
 struct fixed_voltage_data {
        struct regulator_desc desc;
        struct regulator_dev *dev;
@@ -97,11 +99,27 @@ of_get_fixed_voltage_config(struct device *dev,
 static struct regulator_ops fixed_voltage_ops = {
 };
 
+#if defined(CONFIG_OF)
+static const struct of_device_id fixed_of_match[] = {
+       {
+               .compatible = "regulator-fixed",
+       },
+       {
+               .compatible = "gpio-power-switch",
+               .data = (void *)REG_FIXED_POWER_SWITCH,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, fixed_of_match);
+#endif
+
 static int reg_fixed_voltage_probe(struct platform_device *pdev)
 {
        struct fixed_voltage_config *config;
        struct fixed_voltage_data *drvdata;
        struct regulator_config cfg = { };
+       const struct of_device_id *of_id;
+       long flags = 0;
        int ret;
 
        drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
@@ -175,6 +193,13 @@ static int reg_fixed_voltage_probe(struct platform_device 
*pdev)
        cfg.driver_data = drvdata;
        cfg.of_node = pdev->dev.of_node;
 
+       of_id = of_match_node(fixed_of_match, pdev->dev.of_node);
+       if (of_id)
+               flags = (long)of_id->data;
+
+       if (flags & REG_FIXED_POWER_SWITCH)
+               drvdata->desc.userspace_control = 1;
+
        drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
                                               &cfg);
        if (IS_ERR(drvdata->dev)) {
@@ -191,14 +216,6 @@ static int reg_fixed_voltage_probe(struct platform_device 
*pdev)
        return 0;
 }
 
-#if defined(CONFIG_OF)
-static const struct of_device_id fixed_of_match[] = {
-       { .compatible = "regulator-fixed", },
-       {},
-};
-MODULE_DEVICE_TABLE(of, fixed_of_match);
-#endif
-
 static struct platform_driver regulator_fixed_voltage_driver = {
        .probe          = reg_fixed_voltage_probe,
        .driver         = {
-- 
2.9.3

Reply via email to