Hi Hans,

On 2016년 12월 19일 09:13, Hans de Goede wrote:
> Setting the irq_enable bits is taken care of by the irq chip when we
> request the irqs and the driver should not be meddling with the
> irq?_en registers itself.
> 
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> ---
>  drivers/extcon/extcon-axp288.c | 19 +++----------------
>  1 file changed, 3 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 7aec413..a27ee68 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -70,12 +70,6 @@
>  #define DET_STAT_CDP                 2
>  #define DET_STAT_DCP                 3
>  
> -/* IRQ enable-1 register */
> -#define PWRSRC_IRQ_CFG_MASK          (BIT(4)|BIT(3)|BIT(2))
> -
> -/* IRQ enable-6 register */
> -#define BC12_IRQ_CFG_MASK            BIT(1)
> -
>  enum axp288_extcon_reg {
>       AXP288_PS_STAT_REG              = 0x00,
>       AXP288_PS_BOOT_REASON_REG       = 0x02,
> @@ -83,8 +77,6 @@ enum axp288_extcon_reg {
>       AXP288_BC_VBUS_CNTL_REG         = 0x2d,
>       AXP288_BC_USB_STAT_REG          = 0x2e,
>       AXP288_BC_DET_STAT_REG          = 0x2f,
> -     AXP288_PWRSRC_IRQ_CFG_REG       = 0x40,
> -     AXP288_BC12_IRQ_CFG_REG         = 0x45,
>  };
>  
>  enum axp288_mux_select {
> @@ -242,15 +234,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void 
> *data)
>       return IRQ_HANDLED;
>  }
>  
> -static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
> +static void axp288_extcon_enable(struct axp288_extcon_info *info)
>  {
> -     /* Unmask VBUS interrupt */
> -     regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
> -                                             PWRSRC_IRQ_CFG_MASK);
>       regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
>                                               BC_GLOBAL_RUN, 0);
> -     /* Unmask the BC1.2 complete interrupts */
> -     regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
>       /* Enable the charger detection logic */
>       regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
>                                       BC_GLOBAL_RUN, BC_GLOBAL_RUN);
> @@ -327,8 +314,8 @@ static int axp288_extcon_probe(struct platform_device 
> *pdev)
>               }
>       }
>  
> -     /* Enable interrupts */
> -     axp288_extcon_enable_irq(info);
> +     /* Start charger cable type detection */
> +     axp288_extcon_enable(info);
>  
>       return 0;
>  }
> 

Looks good to me.
Acked-by: Chanwoo Choi <cw00.c...@samsung.com>

-- 
Regards,
Chanwoo Choi

Reply via email to