Add dt description of NAND controller on MDM9615.
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Russell King <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Zoran Markovic <[email protected]>
---
arch/arm/boot/dts/qcom-mdm9615.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi
b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index fbc7d68..6d42ff3 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -373,6 +373,22 @@
qcom,ee = <0>;
};
+ nand0: nand@1b400000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1b400000 0x800>;
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
--
1.7.9.5
