[PATCH v3 5/8] ARM: dts: kirkwood-dir665: Utilize new DSA binding

[Florian Fainelli]

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Tested-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 arch/arm/boot/dts/kirkwood-dir665.dts | 49 +++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts 
b/arch/arm/boot/dts/kirkwood-dir665.dts
index 41acbb6dd6ab..4d2b15d6244a 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -194,6 +194,8 @@
        };
 
        dsa {
+               status = "disabled";
+
                compatible = "marvell,dsa";
                #address-cells = <2>;
                #size-cells = <0>;
@@ -241,6 +243,53 @@
 
 &mdio {
        status = "okay";
+
+       switch@0 {
+               compatible = "marvell,mv88e6085";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               label = "lan4";
+                       };
+
+                       port@1 {
+                              reg = <1>;
+                              label = "lan3";
+                       };
+
+                       port@2 {
+                              reg = <2>;
+                              label = "lan2";
+                       };
+
+                       port@3 {
+                              reg = <3>;
+                              label = "lan1";
+                       };
+
+                       port@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       port@6 {
+                               reg = <6>;
+                               label = "cpu";
+                               ethernet = <&eth0port>;
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                               };
+                       };
+               };
+       };
 };
 
 /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
-- 
2.9.3