Bartosz Golaszewski <bgolaszew...@baylibre.com> writes:
> Enable the SATA node for da850-lcdk. We omit the pinctrl property on
> purpose - the muxed SATA pins are not hooked up to anything
> SATA-related on the lcdk.
>
> The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
> 15 for 1.5GHz PLL rate.
leftover comment from previous version?
Kevin
> Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
> ---
> arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
> b/arch/arm/boot/dts/da850-lcdk.dts
> index afcb482..fbeee3c 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -105,6 +105,10 @@
> status = "okay";
> };
>
> +&sata {
> + status = "okay";
> +};
> +
> &mdio {
> pinctrl-names = "default";
> pinctrl-0 = <&mdio_pins>;
