On Mon, Jan 23, 2017 at 9:04 AM, Rob Herring <r...@kernel.org> wrote:
> On Fri, Jan 20, 2017 at 09:50:38PM -0800, Matt Ranostay wrote:
>> Cc: devicet...@vger.kernel.org
>> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
>> ---
>> .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt | 14
>> ++++++++++++++
>> .../devicetree/bindings/net/wireless/marvell-8xxx.txt | 7 ++++++-
>> 2 files changed, 20 insertions(+), 1 deletion(-)
>> create mode 100644
>> Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>> b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>> new file mode 100644
>> index 000000000000..4bb56766982e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>> @@ -0,0 +1,14 @@
>> +* Marvell SD8787 power sequence provider
>> +
>> +Required properties:
>> +- compatible: must be "mmc-pwrseq-sd8787".
>> +- powerdown-gpio: contains a power down GPIO specifier with active state
>> +- reset-gpio: contains a reset GPIO specifier with active state
>
> My comments on the previous v3 still apply.
Ah yikes.. forgot to increment the patchset. And noticed the gpio
isn't gpios... will fixed in "v4"
Thanks,
Matt
>
>> +
>> +Example:
>> +
>> + wifi_pwrseq: wifi_pwrseq {
>> + compatible = "mmc-pwrseq-sd8787";
>> + powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
>> + reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
>> + }
