ZTE's zx2967 I2S controller driver introduces pclk, this
patch documents this fact.
Signed-off-by: Baoyou Xie <baoyou....@linaro.org>
---
Documentation/devicetree/bindings/sound/zte,zx-i2s.txt | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f..77390c0 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible : Must be "zte,zx296702-i2s"
- reg : Must contain I2S core's registers location and length
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the I2S interface.
+ - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
- dmas: Pairs of phandle and specifier for the DMA channel that is used by
the core. The core expects two dma channels for transmit.
- dma-names : Must be "tx" and "rx"
@@ -15,13 +15,17 @@ please check:
* clock/clock-bindings.txt
* dma/dma.txt
+Please note that ZTE ZX296702 I2S controller driver is compatible for zx296702
+and zx296718, so compatible string might be set as follow:
+ "zte,zx296718-i2s", "zte,zx296702-i2s"
+
Example:
i2s0: i2s0@0b005000 {
#sound-dai-cells = <0>;
- compatible = "zte,zx296702-i2s";
+ compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
reg = <0x0b005000 0x1000>;
- clocks = <&lsp0clk ZX296702_I2S0_DIV>;
- clock-names = "tx";
+ clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm
AUDIO_I2S0_PCLK>;
+ clock-names = "wclk", "pclk";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 5>, <&dma 6>;
dma-names = "tx", "rx";
--
2.7.4
