The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
---
No changes in v2.
drivers/regulator/axp20x-regulator.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c
b/drivers/regulator/axp20x-regulator.c
index a3ade9e..034dce8 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -370,6 +370,7 @@ static int axp20x_set_dcdc_freq(struct platform_device
*pdev, u32 dcdcfreq)
step = 75;
break;
case AXP806_ID:
+ case AXP808_ID:
/*
* AXP806 DCDC work frequency setting has the same range and
* step as AXP22X, but at a different register.
@@ -459,6 +460,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev
*rdev, int id, u32 work
break;
case AXP806_ID:
+ case AXP808_ID:
reg = AXP806_DCDC_MODE_CTRL2;
/*
* AXP806 DCDC regulator IDs have the same range as AXP22X.
@@ -492,8 +494,8 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev
*axp20x, int id)
{
u32 reg = 0;
- /* Only AXP806 has poly-phase outputs */
- if (axp20x->variant != AXP806_ID)
+ /* Only AXP806 and AXP808 have poly-phase outputs */
+ if (axp20x->variant != AXP806_ID && axp20x->variant != AXP808_ID)
return false;
regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
@@ -541,6 +543,7 @@ static int axp20x_regulator_probe(struct platform_device
*pdev)
"x-powers,drive-vbus-en");
break;
case AXP806_ID:
+ case AXP808_ID:
regulators = axp806_regulators;
nregulators = AXP806_REG_ID_MAX;
break;
--
2.10.2
