Add documentation for 'st,adc-res' dt optional property.
Signed-off-by: Fabrice Gasnier <fabrice.gasn...@st.com>
---
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 5dfc88e..45f7ff2 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -57,6 +57,9 @@ Optional properties:
- dmas: Phandle to dma channel for this ADC instance.
See ../../dma/dma.txt for details.
- dma-names: Must be "rx" when dmas property is being used.
+- st,adc-res: Resolution (bits) to use for conversions. Must match device
+ available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4). Default
+ is maximum resolution if unset.
Example:
adc: adc@40012000 {
@@ -84,6 +87,7 @@ Example:
st,adc-channels = <8>;
dmas = <&dma2 0 0 0x400 0x0>;
dma-names = "rx";
+ st,adc-res = <8>;
};
...
other adc child nodes follow...
--
1.9.1
