On 02/22/2017 05:05 AM, Thibault Saunier wrote:
> Hello,
>
>
> On 02/21/2017 11:19 PM, Hans Verkuil wrote:
>>
>> On 02/21/2017 11:20 AM, Thibault Saunier wrote:
>>> Use colorspace provided by the user as we are only doing scaling and
>>> color encoding conversion, we won't be able to transform the colorspace
>>> itself and the colorspace won't mater in that operation.
>>>
>>> Also always use output colorspace on the capture side.
>>>
>>> Start using 576p as a threashold to compute the colorspace.
>>> The media documentation says that the V4L2_COLORSPACE_SMPTE170M colorspace
>>> should be used for SDTV and V4L2_COLORSPACE_REC709 for HDTV. But drivers
>>> don't agree on the display resolution that should be used as a threshold.
>>>
>>> From EIA CEA 861B about colorimetry for various resolutions:
>>>
>>> - 5.1 480p, 480i, 576p, 576i, 240p, and 288p
>>> The color space used by the 480-line, 576-line, 240-line, and 288-line
>>> formats will likely be based on SMPTE 170M [1].
>>> - 5.2 1080i, 1080p, and 720p
>>> The color space used by the high definition formats will likely be
>>> based on ITU-R BT.709-4
>>>
>>> This indicates that in the case that userspace does not specify what
>>> colorspace should be used, we should use 576p as a threshold to set
>>> V4L2_COLORSPACE_REC709 instead of V4L2_COLORSPACE_SMPTE170M. Even if it is
>>> only 'likely' and not a requirement it is the best guess we can make.
>>>
>>> The stream should have been encoded with the information and userspace
>>> has to pass it to the driver if it is not the case, otherwise we won't be
>>> able to handle it properly anyhow.
>>>
>>> Also, check for the resolution in G_FMT instead unconditionally setting
>>> the V4L2_COLORSPACE_REC709 colorspace.
>>>
>>> Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
>>> Signed-off-by: Thibault Saunier <thibault.saun...@osg.samsung.com>
>>> Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
>>>
>>> ---
>>>
>>> Changes in v5:
>>> - Squash commit to always use output colorspace on the capture side
>>> inside this one
>>> - Fix typo in commit message
>>>
>>> Changes in v4:
>>> - Reword commit message to better back our assumptions on specifications
>>>
>>> Changes in v3:
>>> - Do not check values in the g_fmt functions as Andrzej explained in
>>> previous review
>>> - Added 'Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>'
>>>
>>> Changes in v2: None
>>>
>>> drivers/media/platform/exynos-gsc/gsc-core.c | 20 +++++++++++++++-----
>>> drivers/media/platform/exynos-gsc/gsc-core.h | 1 +
>>> 2 files changed, 16 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c
>>> b/drivers/media/platform/exynos-gsc/gsc-core.c
>>> index 59a634201830..772599de8c13 100644
>>> --- a/drivers/media/platform/exynos-gsc/gsc-core.c
>>> +++ b/drivers/media/platform/exynos-gsc/gsc-core.c
>>> @@ -454,6 +454,7 @@ int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct
>>> v4l2_format *f)
>>> } else {
>>> min_w = variant->pix_min->target_rot_dis_w;
>>> min_h = variant->pix_min->target_rot_dis_h;
>>> + pix_mp->colorspace = ctx->out_colorspace;
>>> }
>>> pr_debug("mod_x: %d, mod_y: %d, max_w: %d, max_h = %d",
>>> @@ -472,10 +473,15 @@ int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct
>>> v4l2_format *f)
>>> pix_mp->num_planes = fmt->num_planes;
>>> - if (pix_mp->width >= 1280) /* HD */
>>> - pix_mp->colorspace = V4L2_COLORSPACE_REC709;
>>> - else /* SD */
>>> - pix_mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
>>> + if (pix_mp->colorspace == V4L2_COLORSPACE_DEFAULT) {
>>> + if (pix_mp->width > 720 && pix_mp->height > 576) /* HD */
>> I'd use || instead of && here. Ditto for the next patch.
>>
>>> + pix_mp->colorspace = V4L2_COLORSPACE_REC709;
>>> + else /* SD */
>>> + pix_mp->colorspace = V4L2_COLORSPACE_SMPTE170M;
>>> + }
>> Are you sure this is in fact how it is used? If the source of the video
>> is the sensor (camera), then the colorspace is typically SRGB. I'm not
>> really sure you should guess here. All a mem2mem driver should do is to
>> pass the colorspace etc. information from the output to the capture side,
>> and not invent things. That simply makes no sense.
>
> This is not a camera device but a colorspace conversion device, in many
Not really, this is a color encoding conversion device. I.e. it only affects
the Y'CbCr encoding and quantization range. The colorspace (aka chromaticities)
and transfer function remain unchanged.
In fact, I suspect (correct me if I am wrong) that it only converts between
RGB, Y'CbCr 601 and Y'CbCr 709 encodings, where RGB is full range and the Y'CbCr
formats are limited range.
If you pass in limited range RGB it will probably do the wrong thing as I don't
seen any quantization checks in the code.
So the colorspace and xfer_func fields remain unchanged by this driver.
If you want to do this really correctly, then you need to do more. I don't have
time right now to go into this in-depth, but I will try to get back to this on
Monday. I am thinking of documenting this as part of the V4L2 colorspace
documentation. This stuff is complex and if you don't know the rules then it
can be hard to implement correctly.
> cases the info will not be passed by the userspace, basically because the info
> is not encoded in the media stream (this often happens). I am not inventing
> here,
> just making sure we use the most likely value in case none was provided (and
> if none
> was provided it should always be correct given that the encoded stream was
> not broken).
>
> In the case the source is a camera and then we use the colorspace converter
> then the info
> should copied from the camera to the transcoding node (by userspace) so there
> should be
> no problem.
>
> What I am doing here is what is done in other drivers.
Most (all?) other mem2mem drivers do not do color encoding conversion, they
just copy
all the colorspace info from output to capture.
If there are other m2m drivers that do this, then I doubt they do the right
thing.
They are probably right for most cases, but not all.
Regards,
Hans
