On Wed, Feb 15, 2017 at 12:22:13PM +0000, Luis Oliveira wrote:
> - Definitions were added to core library
> - A example was added to designware-core.txt Documentation that shows
> how the slave can be setup using DTS
>
> SLAVE related definitions were added to the core of the controller.
>
> Signed-off-by: Luis Oliveira <loli...@synopsys.com>
> Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> ---
> V5->V6
> - Included an example of use in the device tree binding document
>
> .../devicetree/bindings/i2c/i2c-designware.txt | 16 +++++++++-
> drivers/i2c/busses/i2c-designware-core.h | 35
> ++++++++++++++++++++--
> 2 files changed, 48 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index fee26dc3e858..c6f1d9a63d18 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -20,7 +20,7 @@ Optional properties :
> - i2c-sda-falling-time-ns : should contain the SDA falling time in
> nanoseconds.
> This value which is by default 300ns is used to compute the tHIGH period.
>
> -Example :
> +Examples :
>
> i2c@f0000 {
> #address-cells = <1>;
> @@ -43,3 +43,17 @@ Example :
> i2c-sda-falling-time-ns = <300>;
> i2c-scl-falling-time-ns = <300>;
> };
> +
> + i2c@01120000 {
Drop leading 0. With that, for the binding:
Acked-by: Rob Herring <r...@kernel.org>
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2000 0x100>;
> + clock-frequency = <400000>;
> + clocks = <&i2cclk>;
> + interrupts = <0>;
> +
> + eeprom@64 {
> + compatible = "linux,slave-24c02";
> + reg = <0x40000064>;
> + };
> + };
