[PATCH v2] clk: imx: clk-imxul: The i.mx6ul has no aips_tz3 clock

[Robin van der Gracht]

The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.

Reviewed-by: Fabio Estevam <fabio.este...@nxp.com>
Signed-off-by: Robin van der Gracht <ro...@protonic.nl>
---
 drivers/clk/imx/clk-imx6ul.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 75c35fb..dbd6e59 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -73,7 +73,7 @@ static struct clk *clks[IMX6UL_CLK_END];
 static struct clk_onecell_data clk_data;
 
 static int const clks_init_on[] __initconst = {
-       IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3,
+       IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2,
        IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM,
        IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG,
 };
@@ -341,9 +341,7 @@ static void __init imx6ul_clocks_init(struct device_node 
*ccm_node)
        clks[IMX6UL_CLK_GPT2_SERIAL]    = imx_clk_gate2("gpt2_serial",  
"perclk",       base + 0x68,    26);
        clks[IMX6UL_CLK_UART2_IPG]      = imx_clk_gate2("uart2_ipg",    "ipg",  
        base + 0x68,    28);
        clks[IMX6UL_CLK_UART2_SERIAL]   = imx_clk_gate2("uart2_serial", 
"uart_podf",    base + 0x68,    28);
-       if (clk_on_imx6ul())
-               clks[IMX6UL_CLK_AIPSTZ3]        = imx_clk_gate2("aips_tz3",     
"ahb",          base + 0x68,    30);
-       else if (clk_on_imx6ull())
+       if (clk_on_imx6ull())
                clks[IMX6UL_CLK_AIPSTZ3]        = imx_clk_gate2("aips_tz3",     
"ahb",           base + 0x80,   18);
 
        /* CCGR1 */
@@ -482,6 +480,9 @@ static void __init imx6ul_clocks_init(struct device_node 
*ccm_node)
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clks[clks_init_on[i]]);
 
+       if (clk_on_imx6ull())
+               clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]);
+
        if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
                clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]);
                clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]);
-- 
2.9.3