On Tue,  7 Mar 2017 20:23:59 +0900
Masahiro Yamada <[email protected]> wrote:

> If the higher level accessor chip->write_page() is implemented,
> ecc->write_page() and ecc->write_page_raw() are not required.

I'm about to remove the chip->write_page() hook [1], I hope you're not
planning to use it.

[1]https://patchwork.ozlabs.org/patch/729966/

> 
> Signed-off-by: Masahiro Yamada <[email protected]>
> ---
> 
>  drivers/mtd/nand/nand_base.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index a3c0f47..c32e700 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -4585,11 +4585,12 @@ static bool invalid_ecc_page_accessors(struct 
> nand_chip *chip)
>        * default helpers are not suitable when the core does not
>        * send the READ0/PAGEPROG commands.
>        */
> -     return (!ecc->read_page || !ecc->write_page ||
> -             !ecc->read_page_raw || !ecc->write_page_raw ||
> +     return !ecc->read_page || !ecc->read_page_raw ||
>               (NAND_HAS_SUBPAGE_READ(chip) && !ecc->read_subpage) ||
> -             (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage &&
> -              ecc->hwctl && ecc->calculate));
> +             (!chip->write_page &&
> +              (!ecc->write_page || !ecc->write_page_raw ||
> +               (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage &&
> +                ecc->hwctl && ecc->calculate)));
>  }
>  
>  /**
> @@ -4699,8 +4700,9 @@ int nand_scan_tail(struct mtd_info *mtd)
>               if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
>                   (!ecc->read_page ||
>                    ecc->read_page == nand_read_page_hwecc ||
> -                  !ecc->write_page ||
> -                  ecc->write_page == nand_write_page_hwecc)) {
> +                  (!chip->write_page &&
> +                   (!ecc->write_page ||
> +                    ecc->write_page == nand_write_page_hwecc)))) {
>                       WARN(1, "No ECC functions supplied; hardware ECC not 
> possible\n");
>                       ret = -EINVAL;
>                       goto err_free;

Reply via email to