HDA mode fixed the issue by these two commits: '9476d369d7b3 ALSA: hda - Mute headphone pin on suspend on XPS13 9333' '3e1b0c4a9d56 ALSA: hda - Fix click noise at start on Dell XPS13'
Apply the same workarounds to rt286 can solve the issue. When jack is plugged, it rapidly generates I2C interrupts, which triggers rt286_irq() and rt286_jack_detect(), which produces the click noise. alc_fixup_dell_xps13() in patch_realtek.c sets up a pin that can stop the frantic interrupts, hence avoids the click noise. When rt286 is under powersaving state, play a sound with headphone or plug a headphone in will produce a loud crack sound. Set AMP_OUT_MUTE before power events can make the noise less noticeable. Unmute the AMP when the power is up. v3: Implicit conversion instead of tenary operator. v2: Use 'HP Power' instead of individual power events. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112611 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313434 Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com> --- sound/soc/codecs/rt286.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 9c365a7f758d..97b52697f974 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -36,6 +36,9 @@ #define RT286_VENDOR_ID 0x10ec0286 #define RT288_VENDOR_ID 0x10ec0288 +#define AMP_OUT_MUTE 0xb080 +#define AMP_OUT_UNMUTE 0xb000 + struct rt286_priv { struct reg_default *index_cache; int index_cache_size; @@ -47,6 +50,7 @@ struct rt286_priv { struct delayed_work jack_detect_work; int sys_clk; int clk_id; + bool is_dell_dino; }; static const struct reg_default rt286_index_def[] = { @@ -472,6 +476,32 @@ static int rt286_set_dmic1_event(struct snd_soc_dapm_widget *w, return 0; } +/* Power event function to workaround headphone crack noise */ +static int rt286_hp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(codec); + + if (!rt286->is_dell_dino) + return 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMD: + case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_POST_PMU: + snd_soc_write(codec, RT286_SET_AMP_GAIN_HPO, AMP_OUT_MUTE); + break; + case SND_SOC_DAPM_PRE_PMU: + snd_soc_write(codec, RT286_SET_AMP_GAIN_HPO, AMP_OUT_UNMUTE); + break; + default: + return 0; + } + + return 0; +} + static int rt286_ldo2_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -578,7 +608,9 @@ static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { SND_SOC_DAPM_MUX("HPO Mux", SND_SOC_NOPM, 0, 0, &rt286_hpo_mux), SND_SOC_DAPM_SUPPLY("HP Power", RT286_SET_PIN_HPO, - RT286_SET_PIN_SFT, 0, NULL, 0), + RT286_SET_PIN_SFT, 0, rt286_hp_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), /* Output Mixer */ SND_SOC_DAPM_MIXER("Front", RT286_SET_POWER(RT286_DAC_OUT1), 0, 1, @@ -1175,8 +1207,10 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (pdata) rt286->pdata = *pdata; + rt286->is_dell_dino = dmi_check_system(dmi_dell_dino); + if (dmi_check_system(force_combo_jack_table) || - dmi_check_system(dmi_dell_dino)) + rt286->is_dell_dino) rt286->pdata.cbj_en = true; regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3); @@ -1192,6 +1226,11 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0xb000); } else { + /* Fix headphone click noise */ + if (rt286->is_dell_dino) + regmap_write(rt286->regmap, + RT286_MIC1_DET_CTRL, 0x0020); + regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0x5000); } @@ -1215,7 +1254,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737); regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f); - if (dmi_check_system(dmi_dell_dino)) { + if (rt286->is_dell_dino) { regmap_update_bits(rt286->regmap, RT286_SET_GPIO_MASK, 0x40, 0x40); regmap_update_bits(rt286->regmap, @@ -1224,6 +1263,9 @@ static int rt286_i2c_probe(struct i2c_client *i2c, RT286_SET_GPIO_DATA, 0x40, 0x40); regmap_update_bits(rt286->regmap, RT286_GPIO_CTRL, 0xc, 0x8); + /* Workaound headphone crack noise when probing */ + regmap_write(rt286->regmap, RT286_SET_AMP_GAIN_HPO, + AMP_OUT_MUTE); } if (rt286->i2c->irq) { -- 2.12.0
