On Tue, 2017-03-28 at 20:18 +0200, Helmut Klein wrote: > i know for sure that the bluetooth chip of my system is connected to > uart_A. so this clock must be exposed. > > i don't know if the other 2 uarts are used on other hardware. so i will > remove them from my patch.
What I meant is device trees "upstream". I would expect such patch as part of a series to add support for your board in device-tree, with its bluetooth chipset. I think it would better to drop this patch from the series. You can either keep it for your personal work, or send it again when upstreaming the support for your board and/or add the support for the bluetooth chip. Cheers Jerome > > Helmut > > On 28.03.2017 17:51, Jerome Brunet wrote: > > On Tue, 2017-03-28 at 11:25 +0200, Helmut Klein wrote: > > > Expose the clock ids for the three none AO uarts to the dt-bindings > > > > Are they all used in the device tree ? > > We try to only expose what we need in the DT > > The recent discussion over CLKID_CPUCLK proved it was a sane thing to do. > > > > > > > > Signed-off-by: Helmut Klein <hgkr.kl...@gmail.com> > > > --- > > > drivers/clk/meson/gxbb.h | 6 +++--- > > > include/dt-bindings/clock/gxbb-clkc.h | 3 +++ > > > 2 files changed, 6 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h > > > index 8ee2022ce5d5..1edfaa5fe307 100644 > > > --- a/drivers/clk/meson/gxbb.h > > > +++ b/drivers/clk/meson/gxbb.h > > > @@ -194,7 +194,7 @@ > > > /* #define CLKID_SAR_ADC */ > > > #define CLKID_SMART_CARD 24 > > > #define CLKID_RNG0 25 > > > -#define CLKID_UART0 26 > > > +/* CLKID_UART0 */ > > > #define CLKID_SDHC 27 > > > #define CLKID_STREAM 28 > > > #define CLKID_ASYNC_FIFO 29 > > > @@ -216,7 +216,7 @@ > > > #define CLKID_ADC 45 > > > #define CLKID_BLKMV 46 > > > #define CLKID_AIU 47 > > > -#define CLKID_UART1 48 > > > +/* CLKID_UART1 */ > > > #define CLKID_G2D 49 > > > /* CLKID_USB0 */ > > > /* CLKID_USB1 */ > > > @@ -236,7 +236,7 @@ > > > /* CLKID_USB0_DDR_BRIDGE */ > > > #define CLKID_MMC_PCLK 66 > > > #define CLKID_DVIN 67 > > > -#define CLKID_UART2 68 > > > +/* CLKID_UART2 */ > > > /* #define CLKID_SANA */ > > > #define CLKID_VPU_INTR 70 > > > #define CLKID_SEC_AHB_AHB3_BRIDGE 71 > > > diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt- > > > bindings/clock/gxbb-clkc.h > > > index 692846c7941b..7b329df47752 100644 > > > --- a/include/dt-bindings/clock/gxbb-clkc.h > > > +++ b/include/dt-bindings/clock/gxbb-clkc.h > > > @@ -15,13 +15,16 @@ > > > #define CLKID_SPI 34 > > > #define CLKID_I2C 22 > > > #define CLKID_SAR_ADC 23 > > > +#define CLKID_UART0 26 > > > #define CLKID_ETH 36 > > > +#define CLKID_UART1 48 > > > #define CLKID_USB0 50 > > > #define CLKID_USB1 51 > > > #define CLKID_USB 55 > > > #define CLKID_HDMI_PCLK 63 > > > #define CLKID_USB1_DDR_BRIDGE 64 > > > #define CLKID_USB0_DDR_BRIDGE 65 > > > +#define CLKID_UART2 68 > > > #define CLKID_SANA 69 > > > #define CLKID_GCLK_VENCI_INT0 77 > > > #define CLKID_AO_I2C 93 > > > -- > > > 2.11.0 > > > > > > > > > _______________________________________________ > > > linux-amlogic mailing list > > > linux-amlo...@lists.infradead.org > > > http://lists.infradead.org/mailman/listinfo/linux-amlogic
