On 28.03.2017 21:16, Jerome Brunet wrote:
On Tue, 2017-03-28 at 11:25 +0200, Helmut Klein wrote:
This patch gets the core clock as provided by the DT and enables it.
The code was taken from Amlogic's serial driver, and was tested on my
board.
Signed-off-by: Helmut Klein <hgkr.kl...@gmail.com>
---
drivers/tty/serial/meson_uart.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 60f16795d16b..cb99112288eb 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -600,6 +600,7 @@ static int meson_uart_probe(struct platform_device *pdev)
struct resource *res_mem, *res_irq;
struct uart_port *port;
struct clk *clk;
+ struct clk *core_clk;
int ret = 0;
if (pdev->dev.of_node)
@@ -625,6 +626,15 @@ static int meson_uart_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
+ core_clk = devm_clk_get(&pdev->dev, "core");
+ if (!IS_ERR(core_clk)) {
+ ret = clk_prepare_enable(core_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't enable clkc\n");
+ return ret;
+ }
+ }
+
clk = clk_get(&pdev->dev, NULL);
Now that you have 2 clocks, shouldn't this be named as well ?
if i change the call to "clk = clk_get(&pdev->dev, "xtal");", then IMHO
i must add the
"clock-names" parameter (clock-names = "xtal") to the sections of the 2
AO-UARTs
(uart_AO & uart_AO_B).
Is this ok? (or is my assumption wrong?)
I'm going to add a patch meson-gx.dtsi anyway, so 2 lines more to add,
isn't a big deal.
Helmut
if (IS_ERR(clk))
return PTR_ERR(clk);
--
2.11.0
_______________________________________________
linux-amlogic mailing list
linux-amlo...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
