在 2017年04月05日 15:26, Maxime Ripard 写道:
On Wed, Apr 05, 2017 at 03:17:19PM +0800, Icenowy Zheng wrote:
在 2017年04月05日 15:15, Maxime Ripard 写道:
On Wed, Apr 05, 2017 at 02:45:17AM +0800, Icenowy Zheng wrote:
As we added USB0 route auto switching support for A64, add related
device tree parts to the A64 DTSI file (EHCI0/OHCI0 controllers and the
pmu0 memory area for PHY).
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1c64ea2d23f9..a8916df99048 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -179,8 +179,10 @@
usbphy: phy@01c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
+ <0x01c1a800 0x4>,
<0x01c1b800 0x4>;
reg-names = "phy_ctrl",
+ "pmu0",
This breaks the older DTs, and that property isn't documented.
It's already documented.
In the H3 dual-route patchset I have already added this.
(" * "pmu0" for H3, V3s and A64")
This is not in linux-next then, sorry.
It's already in next-20160405.
P.S. to be compatible with older DTs, I think I should adjust
the phy driver, make it enable dual-route function only when
pmu0 is present.
That, or if we're quick enough, we can still add it to 4.11. There's a
bit of time left.
Thus the device tree binding patch and the DT part of this patchset
should be all pushed to 4.11 .
The device tree binding patch is commit ee73fd7dfc86 ("dt: bindings: add
pmu0 regs for USB PHYs on Allwinner H3/V3s/A64").
Maxime
