On 30 March 2017 at 17:22, Gregory CLEMENT <gregory.clem...@free-electrons.com> wrote: > Hello, > > This the seventh version of the series adding support for the SDHCI > Xenon controller. It can be currently found on the Armada 37xx and the > Armada 7K/8K but will be also used in more Marvell SoC (and not only > the mvebu ones actually). > > v6->v7: > - Add comments on vqmmc and vmmc in examples in dt binding doc. > > - Fix all the issues pointed out by Ulf and Adrian: > > - Align the prefix of function and variable names. > - Replace the if-else with switch statements when checking MMC_TIMING_* > - Remove the spinlocks in set_ios. > - Optimize the delay loop as Adrian patch does. > - Add release of phy params structures > > - Add check of Vqmmc supply in Xenon signal voltage switch. If Vqmmc > regulator doesn't exist, skip standard SD signal voltage regulator > switch process. > > - Remove parse of child node mmc-card. Wait for a better solution. > > v5->v6: > > - Add a generic "mmc-card" parse in core layer. > > - Fix the spelling issues in Xenon dt binding doc and drivers. > > - Remove descriptions to common mmc properties from Xenon dt binding > doc. > > - Split compatible string "marvell,armada-8k-sdhci" into > "marvell,armada-ap806-sdhci" and "marvell,armada-cp110-sdhci". > > - Also updates the example in Xenon dt binding doc. > > - Remove unnecessary dependency on MMC_SDHCI from Xenon entry in > Kconfig. > > - Move Xenon specific dt parse into a separate function. > > - Adjust warnings and condition check in Xenon PHY setting, to remove > fragile hs200->hs400/hs400->hs200 sequence check function. > > - Enable PHY Slow Mode in MMC_TIMING_LEGACY timing if PHY Slow Mode is > required in dts. > > - Add a patch allowing dts backwards compatible for the clock > > v4->v5: > > - Remove the patch to export sdhci_execute_tuning(). It is already > exported in v4.10. > > - Introduce a patch adding a missing clock for the sdhci controller > present on the CP master for A7K/A8K. There is no build dependency > but obviously this patch is need to use the sdhci controller present > on the CP part. > > - Adjust Xenon return setup, to avoid being overwritten by > sdhci_add_host(). > > - Change Xenon register definition prefix to "XENON_". > > - Fix typos in Xenon driver and dt-binding docs. > > - Change compatible string "marvell,armada-7000-sdhci" to > "marvell,armada-8k-sdhci". Actually the Armada 7K SoCs are a subset > of the Armada 8K SoCs. Moreover, the use of the '000' is not > consistent with all the other compatible string already used for the > Armada 7K/8K family. > > - Added the Tested-by from Russell King on an Armada 8K based board. > > v3 -> v4: > For this version a few change have been done: > - fixes 2 bug reported by kbuild-bot > - remove extra of_node_put() > - convert 0 in false for function returning boolean > > - add a device tree node for the sdhci controller present on the CP > master for A7K/A8K. It also led to rename the sdhci0 node on AP to > ap_sdhci0 to make a distinction with the one present on CP master. > > v2 -> v3 > I think that now most (if not all) the remarks had been taking into > account since the second version. According to Ziji Hu, here are the > following changes: > " Changes in V3: > Adjust and improve Xenon DT bindings. Move some caps setting from driver > into > DT. Use mmc-card sub-node to represent eMMC type. > Remove PHY Sampling Fixed Delay Line scan in lower speed mode. > Improve Xenon probe and ->init_card() functions. > Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control. > Split PHY patch into two smaller patches. > Temporarily remove AXI clock before its implementation is improved." > > Besides this changes I also > - Removed the sdhci-xenon-phy.h and moved its content in the > shc-xenon-phy.c file. > - Fixed the tuning-count usage > - Managed the error case for clk_prepare_enable > > For the record the change from v1 was: > " Changes in V2: > rebase on v4.9-rc2. > Re-write Xenon bindings. Ajust Xenon DT property naming. > Add a new DT property to indicate eMMC card type, instead of using > variable card_candidate. > Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data > Add support to HS400 retuning." > > Thanks, > > Gregory > > Gregory CLEMENT (4): > clk: apn806: Turn the eMMC clock as optional for dts backwards compatible > arm64: dts: marvell: add eMMC support for Armada 37xx > arm64: dts: marvell: add sdhci support for Armada 7K/8K > arm64: configs: enable SDHCI driver for Xenon > > Hu Ziji (8): > mmc: sdhci: Export sdhci_set_ios() from sdhci.c > mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c > mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c > dt: bindings: Add bindings for Marvell Xenon SD Host Controller > mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality > mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC > mmc: sdhci-xenon: Add SoC PHY PAD voltage control > MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers > > Konstantin Porotchkin (1): > clk: apn806: Add eMMC clock to system controller driver > > Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 170 +- > MAINTAINERS | 7 +- > arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 +- > arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +- > arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +- > arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 +- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 +- > arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 +- > arch/arm64/configs/defconfig | 1 +- > drivers/clk/mvebu/ap806-system-controller.c | 21 +- > drivers/mmc/host/Kconfig | 8 +- > drivers/mmc/host/Makefile | 3 +- > drivers/mmc/host/sdhci-xenon-phy.c | 835 +++++++- > drivers/mmc/host/sdhci-xenon.c | 548 +++++- > drivers/mmc/host/sdhci-xenon.h | 101 +- > drivers/mmc/host/sdhci.c | 11 +- > drivers/mmc/host/sdhci.h | 4 +- > 17 files changed, 1774 insertions(+), 6 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt > create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c > create mode 100644 drivers/mmc/host/sdhci-xenon.c > create mode 100644 drivers/mmc/host/sdhci-xenon.h > > base-commit: a645cc1df4ff41ba54a2fb839962b8ff142121d9 > -- > git-series 0.9.1
Thanks, applied patch 1->10 for next! 11->13 will have to go via the SoC maintainer tree. Kind regards Uffe