As per request from Marek Vasut, change the following:
- Replace indentation between type and name of local variable from
tabs to spaces
- Replace magic number 0x1F with CFI_MFR_ATMEL macro
- Replace variable 'tmp' with 'ret' and 'i' where appropriate
- Reformat multi-line comments and add newlines where appropriate
No functional change intended.
Cc: cphe...@gmail.com
Cc: David Woodhouse <dw...@infradead.org>
Cc: Brian Norris <computersforpe...@gmail.com>
Cc: Boris Brezillon <boris.brezil...@free-electrons.com>
Cc: Marek Vasut <marek.va...@gmail.com>
Cc: Richard Weinberger <rich...@nod.at>
Cc: Cyrille Pitchen <cyrille.pitc...@atmel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
drivers/mtd/devices/mtd_dataflash.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/devices/mtd_dataflash.c
b/drivers/mtd/devices/mtd_dataflash.c
index a566231..5b7a8c3 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,6 +82,7 @@
#define OP_WRITE_SECURITY_REVC 0x9A
#define OP_WRITE_SECURITY 0x9B /* revision D */
+#define CFI_MFR_ATMEL 0x1F
struct dataflash {
u8 command[4];
@@ -738,14 +739,15 @@ static struct flash_info dataflash_data[] = {
static struct flash_info *jedec_probe(struct spi_device *spi)
{
- int tmp;
- u8 code = OP_READ_ID;
- u8 id[3];
- u32 jedec;
- struct flash_info *info;
+ int ret, i;
+ u8 code = OP_READ_ID;
+ u8 id[3];
+ u32 jedec;
+ struct flash_info *info;
int status;
- /* JEDEC also defines an optional "extended device information"
+ /*
+ * JEDEC also defines an optional "extended device information"
* string for after vendor-specific data, after the three bytes
* we use here. Supporting some chips might require using it.
*
@@ -753,13 +755,14 @@ static struct flash_info *jedec_probe(struct spi_device
*spi)
* That's not an error; only rev C and newer chips handle it, and
* only Atmel sells these chips.
*/
- tmp = spi_write_then_read(spi, &code, 1, id, 3);
- if (tmp < 0) {
+ ret = spi_write_then_read(spi, &code, 1, id, 3);
+ if (ret < 0) {
pr_debug("%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
- return ERR_PTR(tmp);
+ dev_name(&spi->dev), ret);
+ return ERR_PTR(ret);
}
- if (id[0] != 0x1f)
+
+ if (id[0] != CFI_MFR_ATMEL)
return NULL;
jedec = id[0];
@@ -768,9 +771,9 @@ static struct flash_info *jedec_probe(struct spi_device
*spi)
jedec = jedec << 8;
jedec |= id[2];
- for (tmp = 0, info = dataflash_data;
- tmp < ARRAY_SIZE(dataflash_data);
- tmp++, info++) {
+ for (i = 0, info = dataflash_data;
+ i < ARRAY_SIZE(dataflash_data);
+ i++, info++) {
if (info->jedec_id == jedec) {
pr_debug("%s: OTP, sector protect%s\n",
dev_name(&spi->dev),
--
2.9.3
