On Tue, Apr 18, 2017 at 10:10:01AM +0200, Michał Kępień wrote: > Jonathan, I hope this response to Darren's message also addresses your > concerns. Feel free to let me know if it does not. > > > On Fri, Apr 07, 2017 at 03:07:12PM +0200, Michał Kępień wrote: > > > If acpi_fujitsu_laptop_leds_register() returns an error, the latter will > > > become the return value of acpi_fujitsu_laptop_add(), which in turn will > > > be reported by driver core. Simplify code by replacing pr_err() calls > > > with return statements. Return 0 instead of result when no errors occur > > > in order to make the code easier to read. > > > > Hi Michał, > > > > Jonathan's comment regarding the information loss of removing the pr_err > > statements seems valid to me. Based on the outer if block, I take it each > > registration only fails in true error scenarios and not because some laptop > > might have one but not another LED in the list. > > Correct. > > > If so, then the pr_err messages > > would only appear when there was a legitimate problem. I think they're worth > > I am not hell-bent on removing these pr_err() calls, but allow me to > briefly walk you through my thought process. > > devm_led_classdev_register() is basically a managed wrapper for > led_classdev_register(), so let's see under what circumstances the > latter may fail. While it does quite a bit, its return value can only > be different than zero for one of two reasons: > > - there is already a LED with the same name present in the system, so > the kernel automatically renames the one we are registering and the > length of the generated name exceeds LED_MAX_NAME_SIZE, > > - device_create_with_groups() fails, either because we are out of > memory or the device hierarchy is screwed up. > > The first case will never happen, given that the longest LED name that > fujitsu-laptop tries to register is 18 bytes long, the counter used for > auto-incrementation is an unsigned int and LED_MAX_NAME_SIZE is 64. > > In the second case, we are likely to be notified by driver core about > the exact nature of the failure, but more importantly, logging which LED > "caused" the failure makes us none the wiser. Actions taken by the > kernel in response to each of the devm_led_classdev_register() calls are > virtually identical and if any of these fails, we are more than likely > to have problems way more severe than non-functioning LEDs. > > Have I missed anything or perhaps assumed something I should have not? > > > This seems to introduce a behavior change as well. Previously only the last > > LED registered would determine the result - which is wrong of course and I > > believe you noted a related bug in an early patch. Previously, however, if > > LOGOLAMP_POWERON failed, for example, the KEYBOARD_LAMPS would still be > > attempted. > > > > So the question really comes down to this: Is there a legitimate situation > > in > > which one LEDs registration fails and another succeeds? If so, then this > > would > > constitute a regression for such systems. > > The behavior change you mentioned is intentional. As pointed out above, > if any devm_led_classdev_register() call fails, it means we have reached > some inconsistent state which is really unlikely to be improved by > further attempts to register even more devices. > > What do you guys think?
Excellent rationale, I withdraw the concern. Jonathan? -- Darren Hart VMware Open Source Technology Center