On 27/04/17 14:29, Benjamin Gaignard wrote:
> Add validate function to be use to use the correct trigger.
> Add an attribute to configure device mode like for quadrature and
> enable modes
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaign...@st.com>
Hmm.  I think I quite like this as an approach but have changed my
mind several times over the last few days :)

Hence I'd ideally like some more opinions and will be leaving it
on the list for at least a short time longer.

It's missed the current merge window anyway so plenty of time to
tick off this last element of your support.

I also just checked and our docs for the existing modes is rubbish
(or I can't find it with a quick grep ;)
so we should tidy that up and add some description of this as well.     

Jonathan
> ---
>  .../ABI/testing/sysfs-bus-iio-timer-stm32          | 15 ++++++
>  drivers/iio/trigger/stm32-timer-trigger.c          | 61 
> ++++++++++++++++++++++
>  2 files changed, 76 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 
> b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> index 230020e..cccdf57 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> @@ -90,3 +90,18 @@ Description:
>                       Counting is enabled on rising edge of the connected
>                       trigger, and remains enabled for the duration of this
>                       selected mode.
> +
> +What:                
> /sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available
> +KernelVersion:       4.13
> +Contact:     benjamin.gaign...@st.com
> +Description:
> +             Reading returns the list possible trigger modes.
> +
> +What:                /sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode
> +KernelVersion:       4.13
> +Contact:     benjamin.gaign...@st.com
> +Description:
> +             Configure the device counter trigger mode
> +             counting direction is set by in_count0_count_direction
> +             attribute and the counter is clocked by the connected trigger
> +             rising edges.
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c 
> b/drivers/iio/trigger/stm32-timer-trigger.c
> index 0f1a2cf..7c6e90e 100644
> --- a/drivers/iio/trigger/stm32-timer-trigger.c
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -347,12 +347,70 @@ static int stm32_counter_write_raw(struct iio_dev 
> *indio_dev,
>       return -EINVAL;
>  }
>  
> +static int stm32_counter_validate_trigger(struct iio_dev *indio_dev,
> +                                       struct iio_trigger *trig)
> +{
> +     struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> +     const char * const *cur = priv->valids;
> +     unsigned int i = 0;
> +
> +     if (!is_stm32_timer_trigger(trig))
> +             return -EINVAL;
> +
> +     while (cur && *cur) {
> +             if (!strncmp(trig->name, *cur, strlen(trig->name))) {
> +                     regmap_update_bits(priv->regmap,
> +                                        TIM_SMCR, TIM_SMCR_TS,
> +                                        i << TIM_SMCR_TS_SHIFT);
> +                     return 0;
> +             }
> +             cur++;
> +             i++;
> +     }
> +
> +     return -EINVAL;
> +}
> +
>  static const struct iio_info stm32_trigger_info = {
>       .driver_module = THIS_MODULE,
> +     .validate_trigger = stm32_counter_validate_trigger,
>       .read_raw = stm32_counter_read_raw,
>       .write_raw = stm32_counter_write_raw
>  };
>  
> +static const char *const stm32_trigger_modes[] = {
> +     "trigger",
> +};
> +
> +static int stm32_set_trigger_mode(struct iio_dev *indio_dev,
> +                               const struct iio_chan_spec *chan,
> +                               unsigned int mode)
> +{
> +     struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> +
> +     regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, TIM_SMCR_SMS);
> +
> +     return 0;
> +}
> +
> +static int stm32_get_trigger_mode(struct iio_dev *indio_dev,
> +                               const struct iio_chan_spec *chan)
> +{
> +     struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> +     u32 smcr;
> +
> +     regmap_read(priv->regmap, TIM_SMCR, &smcr);
> +
> +     return smcr == TIM_SMCR_SMS ? 0 : -EINVAL;
> +}
> +
> +static const struct iio_enum stm32_trigger_mode_enum = {
> +     .items = stm32_trigger_modes,
> +     .num_items = ARRAY_SIZE(stm32_trigger_modes),
> +     .set = stm32_set_trigger_mode,
> +     .get = stm32_get_trigger_mode
> +};
> +
>  static const char *const stm32_enable_modes[] = {
>       "always",
>       "gated",
> @@ -536,6 +594,8 @@ static ssize_t stm32_count_set_preset(struct iio_dev 
> *indio_dev,
>       IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum),
>       IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum),
>       IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum),
> +     IIO_ENUM("trigger_mode", IIO_SEPARATE, &stm32_trigger_mode_enum),
> +     IIO_ENUM_AVAILABLE("trigger_mode", &stm32_trigger_mode_enum),
>       {}
>  };
>  
> @@ -560,6 +620,7 @@ static struct stm32_timer_trigger 
> *stm32_setup_counter_device(struct device *dev
>       indio_dev->name = dev_name(dev);
>       indio_dev->dev.parent = dev;
>       indio_dev->info = &stm32_trigger_info;
> +     indio_dev->modes = INDIO_HARDWARE_TRIGGERED;
>       indio_dev->num_channels = 1;
>       indio_dev->channels = &stm32_trigger_channel;
>       indio_dev->dev.of_node = dev->of_node;
> 

Reply via email to