On 2017-05-09 00:50, Dong Aisheng wrote:
> It's based on the exist lpuart32 read/write implementation.
>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Cc: Jiri Slaby <jsl...@suse.com> (supporter:TTY LAYER)
> Cc: Fugang Duan <fugang.d...@nxp.com>
> Cc: Stefan Agner <ste...@agner.ch>
> Cc: Mingkai Hu <mingkai...@nxp.com>
> Cc: Yangbo Lu <yangbo...@nxp.com>
> Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com>
> ---
> drivers/tty/serial/fsl_lpuart.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
> index cd4e905..bddd041 100644
> --- a/drivers/tty/serial/fsl_lpuart.c
> +++ b/drivers/tty/serial/fsl_lpuart.c
> @@ -231,6 +231,8 @@
> #define DEV_NAME "ttyLP"
> #define UART_NR 6
>
> +static bool lpuart_is_be;
> +
Other LS1021a IP's such as SPI use the big-endian device tree property
along with regmap.
See e.g.
drivers/spi/spi-fsl-dspi.c
(Used in vf610 in little endian mode and ls1021a in big endian)
Not sure if we want to switch to regmap, but you can also get the
property using of_get_property.
The ls1021a lpuart node do not specify big-endian at the moment (would
probably good to add it), so I would leave big-endian the driver default
and check for little-endian for the new device and check whether that is
specified:
of_get_property(dn, "little-endian", NULL)
--
Stefan
> struct lpuart_port {
> struct uart_port port;
> struct clk *clk;
> @@ -260,6 +262,7 @@ struct lpuart_port {
>
> struct lpuart_soc_data {
> bool is_32;
> + bool is_be;
> };
>
> static struct lpuart_soc_data vf_data = {
> @@ -268,6 +271,7 @@ static struct lpuart_soc_data vf_data = {
>
> static struct lpuart_soc_data ls_data = {
> .is_32 = true,
> + .is_be = true,
> };
>
> static const struct of_device_id lpuart_dt_ids[] = {
> @@ -282,12 +286,15 @@ static void lpuart_dma_tx_complete(void *arg);
>
> static u32 lpuart32_read(void __iomem *addr)
> {
> - return ioread32be(addr);
> + return lpuart_is_be ? ioread32be(addr) : readl(addr);
> }
>
> static void lpuart32_write(u32 val, void __iomem *addr)
> {
> - iowrite32be(val, addr);
> + if (lpuart_is_be)
> + iowrite32be(val, addr);
> + else
> + writel(val, addr);
> }
>
> static void lpuart_stop_tx(struct uart_port *port)
> @@ -2000,6 +2007,7 @@ static int lpuart_probe(struct platform_device *pdev)
> }
> sport->port.line = ret;
> sport->lpuart32 = sdata->is_32;
> + lpuart_is_be = sdata->is_be;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
