Add driver for Wi2Wi W2SG0004/84 GPS module connected through uart.
Use serdev API hooks to monitor and forward the UART traffic to /dev/BTn
and turn on/off the module. It also detects if the module is turned on (sends
data)
but should be off, e.g. if it was already turned on during boot or
power-on-reset.
Additionally, rfkill block/unblock can be used to control an external LNA
(and power down the module if not needed).
The driver concept is based on code developed by NeilBrown <ne...@suse.de>
but simplified and adapted to use the new serdev API introduced in 4.11.
Signed-off-by: H. Nikolaus Schaller <h...@goldelico.com>
---
.../devicetree/bindings/misc/wi2wi,w2sg0004.txt | 20 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/misc/Kconfig | 16 +
drivers/misc/Makefile | 1 +
drivers/misc/w2sg0004.c | 646 +++++++++++++++++++++
include/linux/w2sg0004.h | 27 +
6 files changed, 711 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
create mode 100644 drivers/misc/w2sg0004.c
create mode 100644 include/linux/w2sg0004.h
diff --git a/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
b/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
new file mode 100644
index 000000000000..b7125c7a598c
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
@@ -0,0 +1,20 @@
+Wi2Wi GPS module connected through UART
+
+Should be a subnode of the SoC UART it is connected to (serdev).
+
+Required properties:
+- compatible: wi2wi,w2sg0004 or wi2wi,w2sg0084
+- on-off-gpio: the GPIO that controls the module's on-off toggle input
+
+Optional properties:
+- lna-suppy: an (optional) LNA regulator that is enabled together with the
GPS receiver
+
+Example:
+
+&uart2 {
+ gps: w2sg0004 {
+ compatible = "wi2wi,w2sg0004";
+ lna-supply = <&vsim>; /* LNA regulator */
+ on-off-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* GPIO_145:
trigger for turning on/off w2sg0004 */
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
b/Documentation/devicetree/bindings/vendor-prefixes.txt
index c03d20140366..c56b3181b266 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -345,6 +345,7 @@ voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
wetek WeTek Electronics, limited.
wexler Wexler
+wi2wi Wi2Wi, Inc.
winbond Winbond Electronics corp.
winstar Winstar Display Corp.
wlf Wolfson Microelectronics
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 60f876b03586..7f97ef8fb6cd 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -509,4 +509,20 @@ source "drivers/misc/mic/Kconfig"
source "drivers/misc/genwqe/Kconfig"
source "drivers/misc/echo/Kconfig"
source "drivers/misc/cxl/Kconfig"
+
+config W2SG0004
+ tristate "W2SG00x4 on/off control"
+ depends on GPIOLIB && SERIAL_DEV_BUS
+ help
+ Enable on/off control of W2SG00x4 GPS moduled connected
+ to some SoC UART to allow powering up/down if the /dev/ttyGPSn
+ is opened/closed.
+ It also provides a rfkill gps name to control the LNA power.
+
+config W2SG0004_DEBUG
+ bool "W2SG0004 on/off debugging"
+ depends on W2SG0004
+ help
+ Enable driver debugging mode of W2SG0004 GPS.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 81ef3e67acc9..0e88e06e5ee0 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_SRAM_EXEC) += sram-exec.o
obj-y += mic/
obj-$(CONFIG_GENWQE) += genwqe/
obj-$(CONFIG_ECHO) += echo/
+obj-$(CONFIG_W2SG0004) += w2sg0004.o
obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
diff --git a/drivers/misc/w2sg0004.c b/drivers/misc/w2sg0004.c
new file mode 100644
index 000000000000..1b335317c8ac
--- /dev/null
+++ b/drivers/misc/w2sg0004.c
@@ -0,0 +1,646 @@
+/*
+ * w2sg0004.c
+ * Driver for power controlling the w2sg0004/w2sg0084 GPS receiver.
+ *
+ * This receiver has an ON/OFF pin which must be toggled to
+ * turn the device 'on' of 'off'. A high->low->high toggle
+ * will switch the device on if it is off, and off if it is on.
+ *
+ * To enable receiving on/off requests we register with the
+ * UART power management notifications.
+ *
+ * It is not possible to directly detect the state of the device.
+ * However when it is on it will send characters on a UART line
+ * regularly.
+ *
+ * To detect that the power state is out of sync (e.g. if GPS
+ * was enabled before a reboot), we register for UART data received
+ * notifications.
+ *
+ * In addition we register as a rfkill client so that we can
+ * control the LNA power.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/serdev.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/w2sg0004.h>
+#include <linux/workqueue.h>
+
+#ifdef CONFIG_W2SG0004_DEBUG // not for upstreaming
+#undef pr_debug
+#define pr_debug printk
+#endif
+
+/*
+ * There seems to be restrictions on how quickly we can toggle the
+ * on/off line. data sheets says "two rtc ticks", whatever that means.
+ * If we do it too soon it doesn't work.
+ * So we have a state machine which uses the common work queue to ensure
+ * clean transitions.
+ * When a change is requested we record that request and only act on it
+ * once the previous change has completed.
+ * A change involves a 10ms low pulse, and a 990ms raised level, so only
+ * one change per second.
+ */
+
+enum w2sg_state {
+ W2SG_IDLE, /* is not changing state */
+ W2SG_PULSE, /* activate on/off impulse */
+ W2SG_NOPULSE /* deactivate on/off impulse */
+};
+
+struct w2sg_data {
+ struct rfkill *rf_kill;
+ struct regulator *lna_regulator;
+ int lna_blocked; /* rfkill block gps active */
+ int lna_is_off; /* LNA is currently off */
+ int is_on; /* current state (0/1) */
+ unsigned long last_toggle;
+ unsigned long backoff; /* time to wait since last_toggle */
+ int on_off_gpio; /* the on-off gpio number */
+ struct serdev_device *uart; /* the uart connected to the
chip */
+ struct tty_driver *tty_drv; /* this is the user space tty */
+ struct device *dev; /* returned by
tty_port_register_device() */
+ struct tty_port port;
+ int open_count; /* how often we were opened */
+ enum w2sg_state state;
+ int requested; /* requested state (0/1) */
+ int suspended;
+ spinlock_t lock;
+ struct delayed_work work;
+ int discard_count;
+};
+
+static struct w2sg_data *w2sg_by_minor[1];
+
+static int w2sg_set_lna_power(struct w2sg_data *data)
+{
+ int ret = 0;
+ int off = data->suspended || !data->requested || data->lna_blocked;
+
+ pr_debug("%s: %s\n", __func__, off ? "off" : "on");
+
+ if (off != data->lna_is_off) {
+ data->lna_is_off = off;
+ if (!IS_ERR_OR_NULL(data->lna_regulator)) {
+ if (off)
+ regulator_disable(data->lna_regulator);
+ else
+ ret = regulator_enable(data->lna_regulator);
+ }
+ }
+
+ return ret;
+}
+
+static void w2sg_set_power(void *pdata, int val)
+{
+ struct w2sg_data *data = (struct w2sg_data *) pdata;
+
+ pr_debug("%s to state=%d (requested=%d)\n", __func__, val,
data->requested);
+
+ if (val && !data->requested) {
+ data->requested = true;
+ } else if (!val && data->requested) {
+ data->backoff = HZ;
+ data->requested = false;
+ } else
+ return;
+
+ pr_debug("w2sg00x4 scheduled for %d\n", data->requested);
+
+ if (!data->suspended)
+ schedule_delayed_work(&data->work, 0);
+}
+
+/* called each time data is received by the UART (i.e. sent by the w2sg0004) */
+
+static int w2sg_uart_receive_buf(struct serdev_device *serdev, const unsigned
char *rxdata,
+ size_t count)
+{
+ struct w2sg_data *data = (struct w2sg_data *)
serdev_device_get_drvdata(serdev);
+// unsigned long flags;
+
+// pr_debug("w2sg: %d characters\n", count);
+
+ if (!data->requested && !data->is_on) {
+ /* we have received characters while the w2sg should have been
be turned off */
+ data->discard_count += count;
+ if ((data->state == W2SG_IDLE) &&
+ time_after(jiffies,
+ data->last_toggle + data->backoff)) {
+ /* Should be off by now, time to toggle again */
+ pr_debug("w2sg00x4 has sent %d characters data although
it should be off!\n", data->discard_count);
+ data->discard_count = 0;
+
+ data->is_on = true;
+ data->backoff *= 2;
+// spin_lock_irqsave(&data->lock, flags);
+ if (!data->suspended)
+ schedule_delayed_work(&data->work, 0);
+// spin_unlock_irqrestore(&data->lock, flags);
+ }
+ } else if (data->open_count > 0) {
+ int n;
+
+// pr_debug("w2sg00x4: push %d chars to tty port\n", count);
+ n = tty_insert_flip_string(&data->port, rxdata, count); /* pass
to user-space */
+ if (n != count)
+ pr_debug("w2sg00x4: did loose %d characters\n", count -
n);
+ tty_flip_buffer_push(&data->port);
+ return n;
+ }
+
+ /* assume we have processed everything */
+ return count;
+}
+
+/* try to toggle the power state by sending a pulse to the on-off GPIO */
+
+static void toggle_work(struct work_struct *work)
+{
+ struct w2sg_data *data = container_of(work, struct w2sg_data,
+ work.work);
+
+ switch (data->state) {
+ case W2SG_IDLE:
+// spin_lock_irq(&data->lock);
+ if (data->requested == data->is_on) {
+ spin_unlock_irq(&data->lock);
+ return;
+ }
+// spin_unlock_irq(&data->lock);
+ w2sg_set_lna_power(data); /* update LNA power state */
+ gpio_set_value_cansleep(data->on_off_gpio, 0);
+ data->state = W2SG_PULSE;
+
+ pr_debug("w2sg: power gpio ON\n");
+
+ schedule_delayed_work(&data->work,
+ msecs_to_jiffies(10));
+ break;
+
+ case W2SG_PULSE:
+ gpio_set_value_cansleep(data->on_off_gpio, 1);
+ data->last_toggle = jiffies;
+ data->state = W2SG_NOPULSE;
+ data->is_on = !data->is_on;
+
+ pr_debug("w2sg: power gpio OFF\n");
+
+ schedule_delayed_work(&data->work,
+ msecs_to_jiffies(10));
+ break;
+
+ case W2SG_NOPULSE:
+ data->state = W2SG_IDLE;
+ pr_debug("w2sg: idle\n");
+
+ break;
+
+ }
+}
+
+static int w2sg_rfkill_set_block(void *pdata, bool blocked)
+{
+ struct w2sg_data *data = pdata;
+
+ pr_debug("%s: blocked: %d\n", __func__, blocked);
+
+ data->lna_blocked = blocked;
+
+ return w2sg_set_lna_power(data);
+}
+
+static struct rfkill_ops w2sg0004_rfkill_ops = {
+ .set_block = w2sg_rfkill_set_block,
+};
+
+static struct serdev_device_ops serdev_ops = {
+ .receive_buf = w2sg_uart_receive_buf,
+#if 0
+ .write_wakeup = w2sg_uart_wakeup,
+#endif
+};
+
+/*
+ * we are a man-in the middle between the user-space visible tty port
+ * and the serdev tty where the chip is connected.
+ * This allows us to recognise when the device should be powered on
+ * or off and handle the "false" state that data arrives while no
+ * users-space tty client exists.
+ */
+
+static struct w2sg_data *w2sg_get_by_minor(unsigned int minor)
+{
+ return w2sg_by_minor[minor];
+}
+
+static int w2sg_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct w2sg_data *data;
+ int retval;
+
+ pr_debug("%s() tty = %p\n", __func__, tty);
+
+ data = w2sg_get_by_minor(tty->index);
+ pr_debug("%s() data = %p\n", __func__, data);
+
+ if (!data)
+ return -ENODEV;
+
+ retval = tty_standard_install(driver, tty);
+ if (retval)
+ goto error_init_termios;
+
+ tty->driver_data = data;
+
+ return 0;
+
+error_init_termios:
+ tty_port_put(&data->port);
+ return retval;
+}
+
+static int w2sg_tty_open(struct tty_struct *tty, struct file *file)
+{
+ struct w2sg_data *data = tty->driver_data;
+
+ pr_debug("%s() data = %p open_count = ++%d\n", __func__, data,
data->open_count);
+// val = (val & TIOCM_DTR) != 0; /* DTR controls power on/off */
+
+ w2sg_set_power(data, ++data->open_count > 0);
+
+// we could/should return -Esomething if already open...
+
+ return tty_port_open(&data->port, tty, file);
+}
+
+static void w2sg_tty_close(struct tty_struct *tty, struct file *file)
+{
+ struct w2sg_data *data = tty->driver_data;
+
+ pr_debug("%s()\n", __func__);
+// val = (val & TIOCM_DTR) != 0; /* DTR controls power on/off */
+ w2sg_set_power(data, --data->open_count > 0);
+
+ tty_port_close(&data->port, tty, file);
+}
+
+static int w2sg_tty_write(struct tty_struct *tty,
+ const unsigned char *buffer, int count)
+{
+ struct w2sg_data *data = tty->driver_data;
+
+ /* simply pass down to UART */
+ return serdev_device_write_buf(data->uart, buffer, count);
+}
+
+#if 0
+static void w2sg_tty_tiocmget(...)
+{
+ int val;
+
+ pr_debug("%s(...,%x)\n", __func__, val);
+ val = (val & TIOCM_DTR) != 0; /* DTR controls power on/off */
+ w2sg_set_power((struct w2sg_data *) pdata, val);
+}
+#endif
+
+
+static const struct tty_operations w2sg_serial_ops = {
+ .install = w2sg_tty_install,
+ .open = w2sg_tty_open,
+ .close = w2sg_tty_close,
+ .write = w2sg_tty_write,
+#if 0
+ .write_room = w2sg_tty_write_room,
+ .cleanup = w2sg_tty_cleanup,
+ .ioctl = w2sg_tty_ioctl,
+ .set_termios = w2sg_tty_set_termios,
+ .chars_in_buffer = w2sg_tty_chars_in_buffer,
+ .tiocmget = w2sg_tty_tiocmget,
+ .tiocmset = w2sg_tty_tiocmset,
+ .get_icount = w2sg_tty_get_count,
+ .unthrottle = w2sg_tty_unthrottle
+#endif
+};
+
+static const struct tty_port_operations w2sg_port_ops = {
+};
+
+static int w2sg_probe(struct serdev_device *serdev)
+{
+ struct w2sg_pdata *pdata = NULL;
+ struct w2sg_data *data;
+ struct rfkill *rf_kill;
+ int err;
+ int minor;
+
+ pr_debug("%s()\n", __func__);
+
+ minor = 0;
+ if (w2sg_by_minor[minor]) {
+ pr_err("w2sg minor is already in use!\n");
+ return -ENODEV;
+ }
+
+// can be simplified if we require OF
+
+ if (serdev->dev.of_node) {
+ struct device *dev = &serdev->dev;
+ enum of_gpio_flags flags;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->on_off_gpio = of_get_named_gpio_flags(dev->of_node,
+ "on-off-gpios", 0,
+ &flags);
+
+ if (pdata->on_off_gpio == -EPROBE_DEFER)
+ return -EPROBE_DEFER; /* defer until we have all
gpios */
+
+ pdata->lna_regulator = devm_regulator_get_optional(dev, "lna");
+// shouldn't we defer probing as well???
+
+ pr_debug("%s() lna_regulator = %p\n", __func__,
pdata->lna_regulator);
+
+ serdev->dev.platform_data = pdata;
+ }
+
+ data = devm_kzalloc(&serdev->dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ w2sg_by_minor[minor] = data;
+
+#if 1
+ pr_debug("w2sg serdev_device_set_drvdata\n");
+#endif
+ serdev_device_set_drvdata(serdev, data);
+
+ data->lna_regulator = pdata->lna_regulator;
+ data->lna_blocked = true;
+ data->lna_is_off = true;
+
+ data->on_off_gpio = pdata->on_off_gpio;
+
+ data->is_on = false;
+ data->requested = false;
+ data->state = W2SG_IDLE;
+ data->last_toggle = jiffies;
+ data->backoff = HZ;
+
+ data->uart = serdev;
+
+ INIT_DELAYED_WORK(&data->work, toggle_work);
+// spin_lock_init(&data->lock);
+
+#if 1
+ pr_debug("w2sg devm_gpio_request\n");
+#endif
+ err = devm_gpio_request(&serdev->dev, data->on_off_gpio,
"w2sg0004-on-off");
+ if (err < 0)
+ goto out;
+
+ gpio_direction_output(data->on_off_gpio, false);
+
+ serdev_device_set_client_ops(data->uart, &serdev_ops);
+ serdev_device_open(data->uart);
+
+ serdev_device_set_baudrate(data->uart, 9600);
+ serdev_device_set_flow_control(data->uart, false);
+
+#if 1
+ pr_debug("w2sg rfkill_alloc\n");
+#endif
+ rf_kill = rfkill_alloc("GPS", &serdev->dev, RFKILL_TYPE_GPS,
+ &w2sg0004_rfkill_ops, data);
+ if (rf_kill == NULL) {
+ err = -ENOMEM;
+ goto err_rfkill;
+ }
+
+#if 1
+ pr_debug("w2sg register rfkill\n");
+#endif
+ err = rfkill_register(rf_kill);
+ if (err) {
+ dev_err(&serdev->dev, "Cannot register rfkill device\n");
+ goto err_rfkill;
+ }
+
+ data->rf_kill = rf_kill;
+
+#if 1
+ pr_debug("w2sg alloc_tty_driver\n");
+#endif
+ /* allocate the tty driver */
+ data->tty_drv = alloc_tty_driver(1);
+ if (!data->tty_drv)
+ return -ENOMEM;
+
+ /* initialize the tty driver */
+ data->tty_drv->owner = THIS_MODULE;
+ data->tty_drv->driver_name = "w2sg0004";
+ data->tty_drv->name = "ttyGPS";
+ data->tty_drv->major = 0;
+ data->tty_drv->minor_start = 0;
+ data->tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+ data->tty_drv->subtype = SERIAL_TYPE_NORMAL;
+ data->tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ data->tty_drv->init_termios = tty_std_termios;
+ data->tty_drv->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
+ /*
+ * tty_termios_encode_baud_rate(&data->tty_drv->init_termios, 115200,
115200);
+ * w2sg_tty_termios(&data->tty_drv->init_termios);
+ */
+ tty_set_operations(data->tty_drv, &w2sg_serial_ops);
+
+#if 1
+ pr_debug("w2sg tty_register_driver\n");
+#endif
+ /* register the tty driver */
+ err = tty_register_driver(data->tty_drv);
+ if (err) {
+ pr_err("%s - tty_register_driver failed(%d)\n",
+ __func__, err);
+ put_tty_driver(data->tty_drv);
+ goto err_rfkill;
+ }
+
+#if 1
+ pr_debug("w2sg call tty_port_init\n");
+#endif
+ tty_port_init(&data->port);
+ data->port.ops = &w2sg_port_ops;
+
+#if 1
+ pr_debug("w2sg call tty_port_register_device\n");
+#endif
+/*
+ * FIXME: this appears to reenter this probe() function a second time
+ * which only fails because the gpio is already assigned
+ */
+
+ data->dev = tty_port_register_device(&data->port,
+ data->tty_drv, minor, &serdev->dev);
+
+#if 1
+ pr_debug("w2sg tty_port_register_device -> %p\n", data->dev);
+ pr_debug("w2sg port.tty = %p\n", data->port.tty);
+#endif
+// data->port.tty->driver_data = data; /* make us known in tty_struct
*/
+
+ pr_debug("w2sg probed\n");
+
+#ifdef CONFIG_W2SG0004_DEBUG
+ pr_debug("w2sg DEBUGGING MODE enabled\n");
+ /* turn on for debugging rx notifications */
+ pr_debug("w2sg power gpio ON\n");
+ gpio_set_value_cansleep(data->on_off_gpio, 1);
+ mdelay(100);
+ pr_debug("w2sg power gpio OFF\n");
+ gpio_set_value_cansleep(data->on_off_gpio, 0);
+ mdelay(300);
+#endif
+
+ /* keep off until user space requests the device */
+ w2sg_set_power(data, false);
+
+#if 0 // more debugging - not for upstreaming
+ w2sg_set_power(data, true);
+#endif
+
+ return 0;
+
+err_rfkill:
+ rfkill_destroy(rf_kill);
+ serdev_device_close(data->uart);
+out:
+#if 0
+ if (err == -EBUSY)
+ err = -EPROBE_DEFER;
+#endif
+#if 1
+ pr_debug("w2sg error %d\n", err);
+#endif
+ return err;
+}
+
+static void w2sg_remove(struct serdev_device *serdev)
+{
+ struct w2sg_data *data = serdev_device_get_drvdata(serdev);
+ int minor;
+
+ cancel_delayed_work_sync(&data->work);
+
+ /* what is the right sequence to avoid problems? */
+ serdev_device_close(data->uart);
+
+ // get minor from searching for data == w2sg_by_minor[minor]
+ minor = 0;
+ tty_unregister_device(data->tty_drv, minor);
+
+ tty_unregister_driver(data->tty_drv);
+}
+
+static int w2sg_suspend(struct device *dev)
+{
+ struct w2sg_data *data = dev_get_drvdata(dev);
+
+// spin_lock_irq(&data->lock);
+ data->suspended = true;
+// spin_unlock_irq(&data->lock);
+
+ cancel_delayed_work_sync(&data->work);
+
+ w2sg_set_lna_power(data); /* shuts down if needed */
+
+ if (data->state == W2SG_PULSE) {
+ msleep(10);
+ gpio_set_value_cansleep(data->on_off_gpio, 1);
+ data->last_toggle = jiffies;
+ data->is_on = !data->is_on;
+ data->state = W2SG_NOPULSE;
+ }
+
+ if (data->state == W2SG_NOPULSE) {
+ msleep(10);
+ data->state = W2SG_IDLE;
+ }
+
+ if (data->is_on) {
+ pr_info("GPS off for suspend %d %d %d\n", data->requested,
+ data->is_on, data->lna_is_off);
+
+ gpio_set_value_cansleep(data->on_off_gpio, 0);
+ msleep(10);
+ gpio_set_value_cansleep(data->on_off_gpio, 1);
+ data->is_on = 0;
+ }
+
+ return 0;
+}
+
+static int w2sg_resume(struct device *dev)
+{
+ struct w2sg_data *data = dev_get_drvdata(dev);
+
+// spin_lock_irq(&data->lock);
+ data->suspended = false;
+// spin_unlock_irq(&data->lock);
+
+ pr_info("GPS resuming %d %d %d\n", data->requested,
+ data->is_on, data->lna_is_off);
+
+ schedule_delayed_work(&data->work, 0); /* enables LNA if needed */
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id w2sg0004_of_match[] = {
+ { .compatible = "wi2wi,w2sg0004" },
+ { .compatible = "wi2wi,w2sg0084" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, w2sg0004_of_match);
+#endif
+
+SIMPLE_DEV_PM_OPS(w2sg_pm_ops, w2sg_suspend, w2sg_resume);
+
+static struct serdev_device_driver w2sg_driver = {
+ .probe = w2sg_probe,
+ .remove = w2sg_remove,
+ .driver = {
+ .name = "w2sg0004",
+ .owner = THIS_MODULE,
+ .pm = &w2sg_pm_ops,
+ .of_match_table = of_match_ptr(w2sg0004_of_match)
+ },
+};
+
+module_serdev_device_driver(w2sg_driver);
+
+MODULE_ALIAS("w2sg0004");
+
+MODULE_AUTHOR("NeilBrown <ne...@suse.de>");
+MODULE_DESCRIPTION("w2sg0004 GPS power management driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/w2sg0004.h b/include/linux/w2sg0004.h
new file mode 100644
index 000000000000..ad0c4a18e01d
--- /dev/null
+++ b/include/linux/w2sg0004.h
@@ -0,0 +1,27 @@
+/*
+ * UART slave to allow ON/OFF control of w2sg0004 GPS receiver.
+ *
+ * Copyright (C) 2011 Neil Brown <n...@brown.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+
+
+#ifndef __LINUX_W2SG0004_H
+#define __LINUX_W2SG0004_H
+
+#include <linux/regulator/consumer.h>
+
+struct w2sg_pdata {
+ struct regulator *lna_regulator; /* enable LNA power */
+ int on_off_gpio; /* on-off input of the GPS module */
+};
+#endif /* __LINUX_W2SG0004_H */
--
2.12.2
