[PATCH 07/13] ARM: dts: armada-385-linksys: drop leagcy DSA bindings

[Ralph Sennhauser]

The new ones work so there is little reason to keep the legacy bindings.
Use the rework as the oportunity to drop the legacy node.

Signed-off-by: Ralph Sennhauser <ralph.sennhau...@gmail.com>

---

Notes:

  There is little harm in keeping them but probably no value either, so
  use the cleanup series to get rid of them.
---
 arch/arm/boot/dts/armada-385-linksys.dtsi | 47 -------------------------------
 1 file changed, 47 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi 
b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 6cc1ec7..f1d6b77 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -115,53 +115,6 @@
                        linux,default-trigger = "disk-activity";
                };
        };
-
-       dsa@0 {
-               status = "disabled";
-
-               compatible = "marvell,dsa";
-               #address-cells = <2>;
-               #size-cells = <0>;
-
-               dsa,ethernet = <&eth2>;
-               dsa,mii-bus = <&mdio>;
-
-               switch@0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0x0 0>;  /* MDIO address 0, switch 0 in tree */
-
-                       port@0 {
-                               reg = <0>;
-                               label = "lan4";
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "lan3";
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan2";
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan1";
-                       };
-
-                       port@4 {
-                               reg = <4>;
-                               label = "wan";
-                       };
-
-                       port@5 {
-                               reg = <5>;
-                               label = "cpu";
-                       };
-               };
-       };
 };
 
 &ahci0 {
-- 
2.10.2