[PATCH v2 1/3] iio: adc: ina2xx: Make use of attribute flags consistent on all channels

[Stefan Brüns]

Flags for shared channel attributes should be set on all channels of a
channel set. I.e. SAMP_FREQUENCY and OVERSAMPLING_RATIO are set on the
in_voltage{0,1} channels, thus should be set on in_power, in_current.

Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de>
---
 drivers/iio/adc/ina2xx-adc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 6b588ac3130c..bba10a1b2fcb 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -442,6 +442,8 @@ static ssize_t ina2xx_shunt_resistor_store(struct device 
*dev,
        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
                              BIT(IIO_CHAN_INFO_SCALE) | \
                              BIT(IIO_CHAN_INFO_INT_TIME), \
+       .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+                                  BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
        .scan_index = (_index), \
        .scan_type = { \
                .sign = 'u', \
-- 
2.12.2