Hi Florian, It would be great if you could help me with it.
Currently, what I am doing is. root@arm$ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make -j4 Then I am using Busybox to build the root filesystem root@arm$ qemu-system-arm -M vexpress-a9 -dtb ./linux/arch/arm/boot/dts/vexpress-v2p-ca9.dtb -kernel ./linux/arch/arm/boot/zImage -append "root=/dev/mmcblk0 console=ttyAMA0" -sd ./a9rootfs.ext3 --nographic Which machine I should use for ARMv6 in QEMU. Which dtb file I should use for ? All these questions I have. If anybody knows please let me know. Best, Shubham Bansal On Fri, May 26, 2017 at 1:14 AM, Florian Fainelli <f.faine...@gmail.com> wrote: > On 05/25/2017 12:09 PM, Shubham Bansal wrote: >> Hi Andrew, >> >> On Fri, May 26, 2017 at 12:18 AM, Andrew Lunn <and...@lunn.ch> wrote: >>> On Fri, May 26, 2017 at 12:05:23AM +0530, Shubham Bansal wrote: >>>> Hi Andrew, >>>> >>>> My Apologies. >>>> >>>> I will remove the #ifdef CONFIG_CPU_LITTLE_ENDIAN. Do you have the >>>> ARMv6 machine you can test it on? >>> >>> Sorry, i don't have a v6. >>> >>> Maybe try kzm with qemu-system-qemu? >> >> I am afraid I not so familiar with qemu, otherwise I would have tried >> to test the code on ARMv5,6,7 myself. >> If you can help me with that it would be great, Otherwise I think I >> have to wait for someone to test it for ARMv6. Although, I am pretty >> sure it would work on that as it worked on ARMv5. > > Using QEMU is far less complex than the patch you wrote, the tricky > point me be to find an ARMv6 root filesystem, unless you build the > module into the kernel and let it run its tests. > -- > Florian