On 05/25/2017 01:08 PM, Shubham Bansal wrote: > Hi Florian, > > It would be great if you could help me with it. > > Currently, what I am doing is. > > root@arm$ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make -j4 > > Then I am using Busybox to build the root filesystem > > root@arm$ qemu-system-arm -M vexpress-a9 -dtb > ./linux/arch/arm/boot/dts/vexpress-v2p-ca9.dtb -kernel > ./linux/arch/arm/boot/zImage -append "root=/dev/mmcblk0 > console=ttyAMA0" -sd ./a9rootfs.ext3 --nographic > > Which machine I should use for ARMv6 in QEMU. Which dtb file I should > use for ? All these questions I have. If anybody knows please let me > know.
You should use realview-eb-mpcore for instance (ARM11MPCORE is ARMv6). > > > Best, > Shubham Bansal > > > On Fri, May 26, 2017 at 1:14 AM, Florian Fainelli <f.faine...@gmail.com> > wrote: >> On 05/25/2017 12:09 PM, Shubham Bansal wrote: >>> Hi Andrew, >>> >>> On Fri, May 26, 2017 at 12:18 AM, Andrew Lunn <and...@lunn.ch> wrote: >>>> On Fri, May 26, 2017 at 12:05:23AM +0530, Shubham Bansal wrote: >>>>> Hi Andrew, >>>>> >>>>> My Apologies. >>>>> >>>>> I will remove the #ifdef CONFIG_CPU_LITTLE_ENDIAN. Do you have the >>>>> ARMv6 machine you can test it on? >>>> >>>> Sorry, i don't have a v6. >>>> >>>> Maybe try kzm with qemu-system-qemu? >>> >>> I am afraid I not so familiar with qemu, otherwise I would have tried >>> to test the code on ARMv5,6,7 myself. >>> If you can help me with that it would be great, Otherwise I think I >>> have to wait for someone to test it for ARMv6. Although, I am pretty >>> sure it would work on that as it worked on ARMv5. >> >> Using QEMU is far less complex than the patch you wrote, the tricky >> point me be to find an ARMv6 root filesystem, unless you build the >> module into the kernel and let it run its tests. >> -- >> Florian -- Florian
