Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
register values can be set through the micrel phy driver by using dts
properties.

This seems preferable and allows cleanly fixing suspend/resume.

Signed-off-by: Leonard Crestez <leonard.cres...@nxp.com>
Reviewed-by: Fabio Estevam <fabio.este...@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts 
b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index f18e1f1..d2be8aa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -120,10 +120,16 @@
 
                ethphy0: ethernet-phy@2 {
                        reg = <2>;
+                       micrel,led-mode = <1>;
+                       clocks = <&clks IMX6UL_CLK_ENET_REF>;
+                       clock-names = "rmii-ref";
                };
 
                ethphy1: ethernet-phy@1 {
                        reg = <1>;
+                       micrel,led-mode = <1>;
+                       clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+                       clock-names = "rmii-ref";
                };
        };
 };
-- 
2.7.4

Reply via email to