Hi, On Sun, May 21, 2017 at 12:38:18PM +0200, H. Nikolaus Schaller wrote: > This fixes an issue if both this twl4030_charger driver and > phy-twl4030-usb are compiled as modules and loaded in random order. > It has been observed on GTA04 and OpenPandora devices that in worst > case the boot process hangs and in best case the AC detection fails > with a warning. > > Therefore we add deferred probing checks for the usb_phy and the > iio channel for AC detection. > > For implementing this we must reorder code because we can't safely > return -EPROBE_DEFER after allocating any devm managed interrupt > (it might already/still be enabled without working interrupt handler). > > So the check for required resources that may abort probing by > returning -EPROBE_DEFER, must come first.
This sounds fishy. EPROBE_DEFER should not be different from
other error codes in this regard and devm_ requested resources
should be free'd on any error. Why is irq handler not working?
> Signed-off-by: H. Nikolaus Schaller <h...@goldelico.com>
> ---
> drivers/power/supply/twl4030_charger.c | 37
> ++++++++++++++++++++--------------
> 1 file changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/power/supply/twl4030_charger.c
> b/drivers/power/supply/twl4030_charger.c
> index 785a07bc4f39..945eabdbbc89 100644
> --- a/drivers/power/supply/twl4030_charger.c
> +++ b/drivers/power/supply/twl4030_charger.c
> @@ -984,6 +984,28 @@ static int twl4030_bci_probe(struct platform_device
> *pdev)
>
> platform_set_drvdata(pdev, bci);
>
> + if (bci->dev->of_node) {
> + struct device_node *phynode;
> +
> + phynode = of_find_compatible_node(bci->dev->of_node->parent,
> + NULL, "ti,twl4030-usb");
> + if (phynode) {
> + bci->transceiver = devm_usb_get_phy_by_node(
> + bci->dev, phynode, &bci->usb_nb);
> + if (IS_ERR(bci->transceiver) &&
> + PTR_ERR(bci->transceiver) == -EPROBE_DEFER)
> + return -EPROBE_DEFER; /* PHY not ready */
> + }
> + }
> +
> + bci->channel_vac = iio_channel_get(&pdev->dev, "vac");
> + if (IS_ERR(bci->channel_vac)) {
> + if (PTR_ERR(bci->channel_vac) == -EPROBE_DEFER)
> + return -EPROBE_DEFER; /* iio not ready */
> + dev_warn(&pdev->dev, "could not request vac iio channel");
> + bci->channel_vac = NULL;
> + }
> +
You should not request non-devm managed iio_channel before
devm-managed power-supply. This could be fixed by switching to
devm_iio_channel_get(), which also cleans up some code.
I suspect, that this is also your IRQ problem, since iio_channel
is currently free'd before irqs are free'd, but its used in irq
code.
> bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
> NULL);
> if (IS_ERR(bci->ac)) {
> @@ -1017,25 +1039,10 @@ static int twl4030_bci_probe(struct platform_device
> *pdev)
> return ret;
> }
>
> - bci->channel_vac = iio_channel_get(&pdev->dev, "vac");
> - if (IS_ERR(bci->channel_vac)) {
> - bci->channel_vac = NULL;
> - dev_warn(&pdev->dev, "could not request vac iio channel");
> - }
> -
> INIT_WORK(&bci->work, twl4030_bci_usb_work);
> INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
>
> bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
> - if (bci->dev->of_node) {
> - struct device_node *phynode;
> -
> - phynode = of_find_compatible_node(bci->dev->of_node->parent,
> - NULL, "ti,twl4030-usb");
> - if (phynode)
> - bci->transceiver = devm_usb_get_phy_by_node(
> - bci->dev, phynode, &bci->usb_nb);
> - }
>
> /* Enable interrupts now. */
> reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
-- Sebastian
signature.asc
Description: PGP signature
