To make internal phy worked, need to configure the phy_clock,
phy cru_reset and related registers.

Change-Id: I6971c0a769754b824b1b908b56080cbaf7867d13
Signed-off-by: David Wu <david...@rock-chips.com>
---
 .../devicetree/bindings/net/rockchip-dwmac.txt     |  3 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     | 82 ++++++++++++++++++++++
 2 files changed, 85 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt 
b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 8f42755..0514f69 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -22,6 +22,7 @@ Required properties:
           <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
           <&cru ACLK_GMAC>: AXI clock gate for GMAC
           <&cru PCLK_GMAC>: APB clock gate for GMAC
+          <&cru MAC_PHY>: clock for internal macphy
  - clock-names: One name for each entry in the clocks property.
  - phy-mode: See ethernet.txt file in the same directory.
  - pinctrl-names: Names corresponding to the numbered pinctrl states.
@@ -35,6 +36,8 @@ Required properties:
  - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
  - assigned-clock-parents = parent of main clock.
    can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
+ - phy-type: For internal phy, it must be "internal"; For external phy, no need
+   to configure this.
 
 Optional properties:
  - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as 
default.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c 
b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index a8e8fd5..c1a1413 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -41,6 +41,7 @@ struct rk_gmac_ops {
        void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
        void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
        void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+       void (*internal_phy_powerup)(struct rk_priv_data *bsp_priv);
 };
 
 struct rk_priv_data {
@@ -52,6 +53,7 @@ struct rk_priv_data {
 
        bool clk_enabled;
        bool clock_input;
+       bool internal_phy;
 
        struct clk *clk_mac;
        struct clk *gmac_clkin;
@@ -61,6 +63,9 @@ struct rk_priv_data {
        struct clk *clk_mac_refout;
        struct clk *aclk_mac;
        struct clk *pclk_mac;
+       struct clk *clk_macphy;
+
+       struct reset_control *macphy_reset;
 
        int tx_delay;
        int rx_delay;
@@ -750,6 +755,48 @@ static void rk3399_set_rmii_speed(struct rk_priv_data 
*bsp_priv, int speed)
        .set_rmii_speed = rk3399_set_rmii_speed,
 };
 
+#define RK_GRF_MACPHY_CON0             0xb00
+#define RK_GRF_MACPHY_CON1             0xb04
+#define RK_GRF_MACPHY_CON2             0xb08
+#define RK_GRF_MACPHY_CON3             0xb0c
+
+#define RK_MACPHY_ENABLE               GRF_BIT(0)
+#define RK_MACPHY_DISABLE              GRF_CLR_BIT(0)
+#define RK_MACPHY_CFG_CLK_50M          GRF_BIT(14)
+#define RK_GMAC2PHY_RMII_MODE          (GRF_BIT(6) | GRF_CLR_BIT(7))
+#define RK_GRF_CON2_MACPHY_ID          HIWORD_UPDATE(0x1234, 0xffff, 0)
+#define RK_GRF_CON3_MACPHY_ID          HIWORD_UPDATE(0x35, 0x3f, 0)
+
+static void rk_gmac_internal_phy_powerup(struct rk_priv_data *priv)
+{
+       if (priv->ops->internal_phy_powerup)
+               priv->ops->internal_phy_powerup(priv);
+
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M);
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE);
+
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID);
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID);
+
+       /* disable macphy, the default value is enabled */
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+       if (priv->macphy_reset)
+               reset_control_assert(priv->macphy_reset);
+       usleep_range(10, 20);
+       if (priv->macphy_reset)
+               reset_control_deassert(priv->macphy_reset);
+       usleep_range(10, 20);
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE);
+       msleep(30);
+}
+
+static void rk_gmac_internal_phy_powerdown(struct rk_priv_data *priv)
+{
+       regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+       if (priv->macphy_reset)
+               reset_control_assert(priv->macphy_reset);
+}
+
 static int gmac_clk_init(struct rk_priv_data *bsp_priv)
 {
        struct device *dev = &bsp_priv->pdev->dev;
@@ -803,6 +850,14 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
                        clk_set_rate(bsp_priv->clk_mac, 50000000);
        }
 
+       if (bsp_priv->internal_phy) {
+               bsp_priv->clk_macphy = devm_clk_get(dev, "clk_macphy");
+               if (IS_ERR(bsp_priv->clk_macphy))
+                       dev_err(dev, "cannot get %s clock\n", "clk_macphy");
+               else
+                       clk_set_rate(bsp_priv->clk_macphy, 50000000);
+       }
+
        return 0;
 }
 
@@ -826,6 +881,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, 
bool enable)
                                                bsp_priv->clk_mac_refout);
                        }
 
+                       if (!IS_ERR(bsp_priv->clk_macphy))
+                               clk_prepare_enable(bsp_priv->clk_macphy);
+
                        if (!IS_ERR(bsp_priv->aclk_mac))
                                clk_prepare_enable(bsp_priv->aclk_mac);
 
@@ -858,6 +916,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, 
bool enable)
                                                bsp_priv->clk_mac_refout);
                        }
 
+                       if (!IS_ERR(bsp_priv->clk_macphy))
+                               clk_disable_unprepare(bsp_priv->clk_macphy);
+
                        if (!IS_ERR(bsp_priv->aclk_mac))
                                clk_disable_unprepare(bsp_priv->aclk_mac);
 
@@ -940,6 +1001,21 @@ static struct rk_priv_data *rk_gmac_setup(struct 
platform_device *pdev,
                        bsp_priv->clock_input = false;
        }
 
+       ret = of_property_read_string(dev->of_node, "phy-type", &strings);
+       if (!ret && !strcmp(strings, "internal")) {
+               bsp_priv->internal_phy = true;
+               bsp_priv->macphy_reset = devm_reset_control_get(dev,
+                                 "mac-phy");
+               if (IS_ERR(bsp_priv->macphy_reset)) {
+                       dev_info(dev, "no macphy_reset control found\n");
+                       bsp_priv->macphy_reset = NULL;
+               }
+       } else {
+               bsp_priv->internal_phy = false;
+       }
+       dev_info(dev, "internal PHY? (%s).\n",
+                bsp_priv->internal_phy ? "yes" : "no");
+
        ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
        if (ret) {
                bsp_priv->tx_delay = 0x30;
@@ -1014,6 +1090,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
        pm_runtime_enable(dev);
        pm_runtime_get_sync(dev);
 
+       if (bsp_priv->internal_phy)
+               rk_gmac_internal_phy_powerup(bsp_priv);
+
        return 0;
 }
 
@@ -1021,6 +1100,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
 {
        struct device *dev = &gmac->pdev->dev;
 
+       if (gmac->internal_phy)
+               rk_gmac_internal_phy_powerdown(gmac);
+
        pm_runtime_put_sync(dev);
        pm_runtime_disable(dev);
 
-- 
1.9.1


Reply via email to