There are two mac controllers in the rk3328, the one connects to external phy, and the other one connects to internal phy. Like the mac of external phy, the internal phy's mac also needs to configure the related mac registers at GRF.
Signed-off-by: David Wu <david...@rock-chips.com> --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 90e1fc8..c4c58a2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -323,6 +323,8 @@ static void rk3288_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed) #define RK3328_GRF_MAC_CON0 0x0900 #define RK3328_GRF_MAC_CON1 0x0904 +#define RK3328_GRF_MAC_CON2 0x0908 +#define RK3328_GRF_MACPHY_CON1 0xb04 /* RK3328_GRF_MAC_CON0 */ #define RK3328_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7) @@ -349,6 +351,9 @@ static void rk3288_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed) #define RK3328_GMAC_RXCLK_DLY_ENABLE GRF_BIT(1) #define RK3328_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(0) +/* RK3328_GRF_MACPHY_CON1 */ +#define RK3328_MACPHY_RMII_MODE GRF_BIT(9) + static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv, int tx_delay, int rx_delay) { @@ -373,13 +378,17 @@ static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv, static void rk3328_set_to_rmii(struct rk_priv_data *bsp_priv) { struct device *dev = &bsp_priv->pdev->dev; + unsigned int reg; if (IS_ERR(bsp_priv->grf)) { dev_err(dev, "Missing rockchip,grf property\n"); return; } - regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, + reg = bsp_priv->internal_phy ? RK3328_GRF_MAC_CON2 : + RK3328_GRF_MAC_CON1; + + regmap_write(bsp_priv->grf, reg, RK3328_GMAC_PHY_INTF_SEL_RMII | RK3328_GMAC_RMII_MODE); } @@ -409,29 +418,40 @@ static void rk3328_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed) static void rk3328_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed) { struct device *dev = &bsp_priv->pdev->dev; + unsigned int reg; if (IS_ERR(bsp_priv->grf)) { dev_err(dev, "Missing rockchip,grf property\n"); return; } + reg = bsp_priv->internal_phy ? RK3328_GRF_MAC_CON2 : + RK3328_GRF_MAC_CON1; + if (speed == 10) - regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, + regmap_write(bsp_priv->grf, reg, RK3328_GMAC_RMII_CLK_2_5M | RK3328_GMAC_SPEED_10M); else if (speed == 100) - regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, + regmap_write(bsp_priv->grf, reg, RK3328_GMAC_RMII_CLK_25M | RK3328_GMAC_SPEED_100M); else dev_err(dev, "unknown speed value for RMII! speed=%d", speed); } +static void rk3328_internal_phy_powerup(struct rk_priv_data *priv) +{ + regmap_write(priv->grf, RK3328_GRF_MACPHY_CON1, + RK3328_MACPHY_RMII_MODE); +} + static const struct rk_gmac_ops rk3328_ops = { .set_to_rgmii = rk3328_set_to_rgmii, .set_to_rmii = rk3328_set_to_rmii, .set_rgmii_speed = rk3328_set_rgmii_speed, .set_rmii_speed = rk3328_set_rmii_speed, + .internal_phy_powerup = rk3328_internal_phy_powerup, }; #define RK3366_GRF_SOC_CON6 0x0418 -- 1.9.1