On Wed, Jun 21, 2017 at 04:30:08PM +0200, Fabrice Gasnier wrote:
> Add documentation for STMicroelectronics STM32 Low-Power Timer binding.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasn...@st.com>
> ---
> Changes in v2:
> - Lee's comments: s/Low Power/Low-Power/, remove 0x in example, improve
>   properties descriptions
> ---
>  .../devicetree/bindings/mfd/stm32-lptimer.txt      | 48 
> ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt 
> b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> new file mode 100644
> index 0000000..af859c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> @@ -0,0 +1,48 @@
> +STMicroelectronics STM32 Low-Power Timer
> +
> +The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
> +functions:
> +- PWM output (with programmable prescaler, configurable polarity)
> +- Quadrature encoder, counter
> +- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
> +
> +Required properties:
> +- compatible:                Must be "st,stm32-lptimer".
> +- reg:                       Offset and length of the device's register set.
> +- clocks:            Phandle to the clock used by the LP Timer module.
> +- clock-names:               Must be "mux".
> +- #address-cells:    Should be '<1>'.
> +- #size-cells:               Should be '<0>'.
> +
> +Optional subnodes:
> +- pwm:                       See ../pwm/pwm-stm32-lp.txt
> +- counter:           See ../iio/timer/stm32-lptimer-cnt.txt
> +- trigger:           See ../iio/timer/stm32-lptimer-trigger.txt
> +
> +Example:
> +
> +     lptimer1: lptimer@40002400 {

timer@...

> +             compatible = "st,stm32-lptimer";
> +             reg = <0x40002400 0x400>;
> +             clocks = <&timer_clk>;
> +             clock-names = "mux";
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             pwm {
> +                     compatible = "st,stm32-pwm-lp";
> +                     pinctrl-names = "default";
> +                     pinctrl-0 = <&lppwm1_pins>;
> +             };
> +
> +             trigger@0 {
> +                     compatible = "st,stm32-lptimer-trigger";
> +                     reg = <0>;

Is there more than 1? 

> +             };
> +
> +             counter {
> +                     compatible = "st,stm32-lptimer-counter";
> +                     pinctrl-names = "default";
> +                     pinctrl-0 = <&lptim1_in_pins>;
> +             };
> +     };
> -- 
> 1.9.1
> 

Reply via email to