Hi Rafael,
On Thu, Jun 29, 2017 at 12:13:18AM +0200, Rafael J. Wysocki wrote:
> On Wednesday, June 21, 2017 03:45:44 PM Lee, Chun-Yi wrote:
> > In hotplug logic, it always indicates non-specific failure to
> > platform through _OST when handing acpi hot-remove event failed. Then
> > platform terminates the hot-remove process but it can not identify
> > the reason.
> >
> > Base on current hot-remove code, there have two situations that it
> > returns busy:
> > - OSPM try to offline an individual device, but the device offline
> > function returns busy.
> > - When the ejection event is applied to an "not offlined yet" container.
> > OSPM send kobject change event to userspace and returns busy.
> >
> > Both of them will returns -EBUSY to acpi device hotplug function then
> > hotplug function indicates non-specific failure to platform just like
> > any other error, e.g. -ENODEV or -EIO.
> >
> > The benefit to platform for identifying the OS busy state is that
> > platform can be applied different approach to handle the busy but
> > not just terminate the hot-remove process by unknown reason. For
> > example, platform can wait for a while then triggers hot-remove
> > again.
> >
> > This RFC patch adds one more parameter to the handler function of
> > acpi generic hotplug event to give the function a chance to propose
> > the return code of _OST. In this case, it sets ost return code to
> > ACPI_OST_SC_DEVICE_BUSY when the acpi hot remove function returns
> > -EBUSY.
> >
> > v3:
> > Removed redundant 'else' in acpi_ost_status_code(). (Andy Shevchenko)
> >
> > v2:
> > Do not overwrite ost code in acpi_generic_hotplug_event(). Move
> > the "error code to ost code" logic to a help function. (Andy Shevchenko)
> >
> > Cc: "Rafael J. Wysocki" <r...@rjwysocki.net>
> > Cc: Len Brown <l...@kernel.org>
> > Cc: Andy Shevchenko <andy.shevche...@gmail.com>
> > Cc: Michal Hocko <mho...@suse.cz>
> > Signed-off-by: "Lee, Chun-Yi" <j...@suse.com>
> > ---
> > drivers/acpi/scan.c | 21 +++++++++++++++------
> > 1 file changed, 15 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> > index 3a10d7573477..41f5065190c7 100644
> > --- a/drivers/acpi/scan.c
> > +++ b/drivers/acpi/scan.c
> > @@ -384,6 +384,20 @@ static int acpi_generic_hotplug_event(struct
> > acpi_device *adev, u32 type)
> > return -EINVAL;
> > }
> >
> > +static int acpi_ost_status_code(u32 src, int error)
> > +{
> > + switch (src) {
> > + case ACPI_NOTIFY_EJECT_REQUEST:
> > + case ACPI_OST_EC_OSPM_EJECT:
> > + if (error == -EPERM)
> > + return ACPI_OST_SC_EJECT_NOT_SUPPORTED;
> > + if (error == -EBUSY)
> > + return ACPI_OST_SC_DEVICE_BUSY;
> > + break;
> > + }
> > + return error ? ACPI_OST_SC_NON_SPECIFIC_FAILURE : ACPI_OST_SC_SUCCESS;
> > +}
>
> I'm not sure why you need the function above?
>
> It only has one user anyway.
>
Because different hotplug source event may has different
OST code definition. So I want to use a function to handle
the the complexity. The originial function like this:
static int acpi_ost_status_code(u32 src, int error)
{
switch (src) {
case ACPI_NOTIFY_EJECT_REQUEST:
case ACPI_OST_EC_OSPM_EJECT:
if (error == -EPERM)
return ACPI_OST_SC_EJECT_NOT_SUPPORTED;
if (error == -EBUSY)
return ACPI_OST_SC_DEVICE_BUSY;
break;
case ACPI_OST_EC_OSPM_INSERTION:
if (error == -EPERM)
return ACPI_OST_SC_INSERT_NOT_SUPPORTED;
if (error == -EBUSY)
return ACPI_OST_SC_INSERT_IN_PROGRESS;
break;
}
return error ? ACPI_OST_SC_NON_SPECIFIC_FAILURE : ACPI_OST_SC_SUCCESS;
}
The ACPI_OST_EC_OSPM_INSERTION represents "Insertion Processing
(Source Event: 0x200)" that it has different ost code definition.
Because the machine supports "Insertion" that has not yet appeared.
So I removed the ACPI_OST_EC_OSPM_INSERTION case block.
> > +
> > void acpi_device_hotplug(struct acpi_device *adev, u32 src)
> > {
> > u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
> > @@ -404,10 +418,6 @@ void acpi_device_hotplug(struct acpi_device *adev, u32
> > src)
> > error = dock_notify(adev, src);
> > } else if (adev->flags.hotplug_notify) {
> > error = acpi_generic_hotplug_event(adev, src);
> > - if (error == -EPERM) {
> > - ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
> > - goto err_out;
> > - }
> > } else {
> > int (*notify)(struct acpi_device *, u32);
> >
> > @@ -423,9 +433,8 @@ void acpi_device_hotplug(struct acpi_device *adev, u32
> > src)
> > else
> > goto out;
> > }
> > - if (!error)
> > - ost_code = ACPI_OST_SC_SUCCESS;
>
> I just would do:
>
> switch (error) {
> case 0:
> ost_code = ACPI_OST_SC_SUCCESS;
> break;
> case -EBUSY:
> ost_code = ACPI_OST_SC_DEVICE_BUSY;
> break;
> default:
> ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
> break;
> }
>
Currently the above switch-case works. But if considering
ACPI_OST_EC_OSPM_INSERTION in the future then it's not enough.
Thanks a lot!
Joey Lee
