On Mon, Jul 3, 2017 at 11:33 PM, Loc Ho <l...@apm.com> wrote: > The current SPCR code does not check the access width of the mmio, and > uses a default of 8bit register accesses. This prevents devices that > only do 16 or 32bit register accesses from working. By simply checking > this field and setting the mmio string appropriately, this issue can be > corrected. To prevent any legacy issues, the code will default to 8bit > accesses if the value is anything but 16 or 32. > > Signed-off-by: Loc Ho <l...@apm.com> > [Re-send as single patch set] > Signed-off-by: Jon Mason <jon.ma...@broadcom.com>
Greg, Aleksey, any objections here? If not, I'll route this through the ACPI tree. > --- > drivers/acpi/spcr.c | 18 ++++++++++++++++-- > include/acpi/acrestyp.h | 7 +++++++ > 2 files changed, 23 insertions(+), 2 deletions(-) > > diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c > index 3afa8c1..2905063 100644 > --- a/drivers/acpi/spcr.c > +++ b/drivers/acpi/spcr.c > @@ -74,8 +74,22 @@ int __init parse_spcr(bool earlycon) > goto done; > } > > - iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ? > - "mmio" : "io"; > + if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { > + switch (table->serial_port.access_width) { > + default: > + pr_err("Unexpected SPCR Access Width. Defaulting to > byte size\n"); > + case ACPI_ACCESS_SIZE_BYTE: > + iotype = "mmio"; > + break; > + case ACPI_ACCESS_SIZE_WORD: > + iotype = "mmio16"; > + break; > + case ACPI_ACCESS_SIZE_DWORD: > + iotype = "mmio32"; > + break; > + } > + } else > + iotype = "io"; > > switch (table->interface_type) { > case ACPI_DBG2_ARM_SBSA_32BIT: > diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h > index f0f7403..781cb55 100644 > --- a/include/acpi/acrestyp.h > +++ b/include/acpi/acrestyp.h > @@ -372,6 +372,13 @@ struct acpi_resource_generic_register { > u64 address; > }; > > +/* Generic Address Space Access Sizes */ > +#define ACPI_ACCESS_SIZE_UNDEFINED 0 > +#define ACPI_ACCESS_SIZE_BYTE 1 > +#define ACPI_ACCESS_SIZE_WORD 2 > +#define ACPI_ACCESS_SIZE_DWORD 3 > +#define ACPI_ACCESS_SIZE_QWORD 4 > + > struct acpi_resource_gpio { > u8 revision_id; > u8 connection_type; > -- > 1.8.3.1 >