[PATCH v1 1/1] dt-binding: ptp: Add SoC compatibility strings for dte ptp clock

[Arun Parameswaran]

Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.

Fixed the document heading and node name.

Fixes: 80d6076140b2 ("dt-binding: ptp: add bindings document for dte based ptp 
clock")
Signed-off-by: Arun Parameswaran <arun.parameswa...@broadcom.com>
---
 Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt 
b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
index 07590bc..7c04e22 100644
--- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
+++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
@@ -1,13 +1,20 @@
-* Broadcom Digital Timing Engine(DTE) based PTP clock driver
+* Broadcom Digital Timing Engine(DTE) based PTP clock
 
 Required properties:
-- compatible: should be "brcm,ptp-dte"
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
 - reg: address and length of the DTE block's NCO registers
 
 Example:
 
-ptp_dte: ptp_dte@180af650 {
-       compatible = "brcm,ptp-dte";
+ptp: ptp-dte@180af650 {
+       compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
        reg = <0x180af650 0x10>;
        status = "okay";
 };
-- 
1.9.1