Keep supporting proprietary "xlnx,phy-type" attribute and add support for
MII connectivity to the PHY.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Alvaro Gamez Machado <alvaro.ga...@hazent.com>
---
Changes from v2:
* Replaced u32 phy_mode -> phy_interface_t phy_mode
* Fix bug we introduced PHY_INTERFACE_MODE_RGMII ->
PHY_INTERFACE_MODE_RGMII_ID
.../devicetree/bindings/net/xilinx_axienet.txt | 55 ++++++++++++++++++++++
drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 48 ++++++++++++++-----
3 files changed, 93 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/xilinx_axienet.txt
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
new file mode 100644
index 000000000000..38f9ec076743
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -0,0 +1,55 @@
+XILINX AXI ETHERNET Device Tree Bindings
+--------------------------------------------------------
+
+Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+provides connectivity to an external ethernet PHY supporting different
+interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+segments of memory for buffering TX and RX, as well as the capability of
+offloading TX/RX checksum calculation off the processor.
+
+Management configuration is done through the AXI interface, while payload is
+sent and received through means of an AXI DMA controller. This driver
+includes the DMA driver code, so this driver is incompatible with AXI DMA
+driver.
+
+For more details about mdio please refer phy.txt file in the same directory.
+
+Required properties:
+- compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
+ "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
+- reg : Address and length of the IO space.
+- interrupts : Should be a list of two interrupt, TX and RX.
+- phy-handle : Should point to the external phy device.
+ See ethernet.txt file in the same directory.
+- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware
+
+Optional properties:
+- phy-mode : See ethernet.txt
+- xlnx,phy-type : Deprecated, do not use, but still accepted in
preference
+ to phy-mode.
+- xlnx,txcsum : 0 or empty for disabling TX checksum offload,
+ 1 to enable partial TX checksum offload,
+ 2 to enable full TX checksum offload
+- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
+
+Example:
+ axi_ethernet_eth: ethernet@40c00000 {
+ compatible = "xlnx,axi-ethernet-1.00.a";
+ device_type = "network";
+ interrupt-parent = <µblaze_0_axi_intc>;
+ interrupts = <2 0>;
+ phy-mode = "mii";
+ reg = <0x40c00000 0x40000>;
+ xlnx,rxcsum = <0x2>;
+ xlnx,rxmem = <0x800>;
+ xlnx,txcsum = <0x2>;
+ phy-handle = <&phy0>;
+ axi_ethernetlite_0_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@0 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h
b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index af27f7d1cbf3..5ef626331f85 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -389,7 +389,7 @@ struct axidma_bd {
* @dma_err_tasklet: Tasklet structure to process Axi DMA errors
* @tx_irq: Axidma TX IRQ number
* @rx_irq: Axidma RX IRQ number
- * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
+ * @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
* @options: AxiEthernet option word
* @last_link: Phy link state in which the PHY was negotiated earlier
* @features: Stores the extended features supported by the axienet hw
@@ -432,7 +432,7 @@ struct axienet_local {
int tx_irq;
int rx_irq;
- u32 phy_type;
+ phy_interface_t phy_mode;
u32 options; /* Current options word */
u32 last_link;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 33c595f4691d..e74e1e897864 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -531,11 +531,11 @@ static void axienet_adjust_link(struct net_device *ndev)
link_state = phy->speed | (phy->duplex << 1) | phy->link;
if (lp->last_link != link_state) {
if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) {
- if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X)
+ if (lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
setspeed = 0;
} else {
if ((phy->speed == SPEED_1000) &&
- (lp->phy_type == XAE_PHY_TYPE_MII))
+ (lp->phy_mode == PHY_INTERFACE_MODE_MII))
setspeed = 0;
}
@@ -935,15 +935,8 @@ static int axienet_open(struct net_device *ndev)
return ret;
if (lp->phy_node) {
- if (lp->phy_type == XAE_PHY_TYPE_GMII) {
- phydev = of_phy_connect(lp->ndev, lp->phy_node,
- axienet_adjust_link, 0,
- PHY_INTERFACE_MODE_GMII);
- } else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) {
- phydev = of_phy_connect(lp->ndev, lp->phy_node,
- axienet_adjust_link, 0,
- PHY_INTERFACE_MODE_RGMII_ID);
- }
+ phydev = of_phy_connect(lp->ndev, lp->phy_node,
+ axienet_adjust_link, 0, lp->phy_mode);
if (!phydev)
dev_err(lp->dev, "of_phy_connect() failed\n");
@@ -1539,7 +1532,38 @@ static int axienet_probe(struct platform_device *pdev)
* the device-tree and accordingly set flags.
*/
of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem);
- of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &lp->phy_type);
+
+ /* Start with the proprietary, and broken phy_type */
+ ret = of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &value);
+ if (!ret) {
+ netdev_warn(ndev, "Please upgrade your device tree binary blob
to use phy-mode");
+ switch (value) {
+ case XAE_PHY_TYPE_MII:
+ lp->phy_mode = PHY_INTERFACE_MODE_MII;
+ break;
+ case XAE_PHY_TYPE_GMII:
+ lp->phy_mode = PHY_INTERFACE_MODE_GMII;
+ break;
+ case XAE_PHY_TYPE_RGMII_2_0:
+ lp->phy_mode = PHY_INTERFACE_MODE_RGMII_ID;
+ break;
+ case XAE_PHY_TYPE_SGMII:
+ lp->phy_mode = PHY_INTERFACE_MODE_SGMII;
+ break;
+ case XAE_PHY_TYPE_1000BASE_X:
+ lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX;
+ break;
+ default:
+ ret = -EINVAL;
+ goto free_netdev;
+ }
+ } else {
+ lp->phy_mode = of_get_phy_mode(pdev->dev.of_node);
+ if (lp->phy_mode < 0) {
+ ret = -EINVAL;
+ goto free_netdev;
+ }
+ }
/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
--
2.11.0
