Hi Heiko
Thanks for the test.
On 2017年07月27日 18:10, Heiko Stübner wrote:
Am Donnerstag, 27. Juli 2017, 11:51:06 CEST schrieb Heiko Stübner:
Hi Mark,
Am Mittwoch, 26. Juli 2017, 14:19:25 CEST schrieb Mark Yao:
Grouping the vop registers facilitates make register
definition clearer, and also is useful for different vop
reuse the same group register.
Signed-off-by: Mark Yao <mark....@rock-chips.com>
---
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 99
++++++++++++------------
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 60 ++++++++-------
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 112
+++++++++++++++------------- 3 files changed, 144 insertions(+), 127
deletions(-)
This breaks display support on both rk3036 and rk3288 and I end up
with a null pointer dereference in
[ 10.640297] Unable to handle kernel NULL pointer dereference at virtual
address 00000000 [ 10.654430] pgd = c0204000
[ 10.657452] [00000000] *pgd=00000000
[ 10.661473] Internal error: Oops: 5 [#1] SMP ARM
[ 10.666635] Modules linked in: snd_pcm media snd_timer phy_rockchip_dp
snd soundcore rockchipdrm dw_hdmi analogix_dp rtc_rk808 pwm_rockchip
clk_rk808 spi_rockchip [ 10.682897] CPU: 2 PID: 143 Comm: kworker/2:2 Not
tainted 4.13.0-rc2-01791-g2b86603d0515 #355 [ 10.692430] Hardware name:
Rockchip (Device Tree)
[ 10.697692] Workqueue: events deferred_probe_work_func
[ 10.702152] Linux video capture interface: v2.00
[ 10.708590] task: ee38c800 task.stack: ed2e6000
[ 10.713656] PC is at vop_reg_set.constprop.4+0x4/0xa8 [rockchipdrm]
[ 10.720668] LR is at vop_bind+0x568/0x8a0 [rockchipdrm]
The obvious reason for that is
@@ -164,14 +153,20 @@ static inline uint32_t vop_read_reg(struct vop *vop,
uint32_t base, return (vop_readl(vop, base + reg->offset) >> reg->shift) &
reg->mask; }
-static inline void vop_mask_write(struct vop *vop, uint32_t offset,
- uint32_t mask, uint32_t shift, uint32_t v,
- bool write_mask, bool relaxed)
+static void vop_reg_set(struct vop *vop, const struct vop_reg *reg,
+ uint32_t _offset, uint32_t _mask, uint32_t v,
+ const char *reg_name)
{
- if (!mask)
+ int offset = reg->offset + _offset;
+ int mask = reg->mask & _mask;
+ int shift = reg->shift;
Does the crash is that using reg->offset/mask/shift before !reg checking?
+
+ if (!reg || !reg->mask) {
+ dev_dbg(vop->dev, "Warning: not support %s\n", reg_name);
return;
+ }
where the check for !reg happens after it got already dereferenced.
But even with that fixed I end up with
on rk3288:
[ 7.254823] rockchip-vop ff930000.vop: Warning: not support global_regdone_en
[ 7.262847] rockchip-vop ff930000.vop: Warning: not support gate
[ 7.269580] rockchip-vop ff930000.vop: Warning: not support gate
[ 7.302765] rockchip-vop ff940000.vop: Warning: not support global_regdone_en
[ 7.310758] rockchip-vop ff940000.vop: Warning: not support gate
[ 7.317475] rockchip-vop ff940000.vop: Warning: not support gate
[ 7.425724] rockchip-vop ff930000.vop: Warning: not support edp_pin_pol
[ 7.526298] rockchip-vop ff940000.vop: Warning: not support hdmi_pin_pol
Rk3288 does not support independent pin_pol settings, all output interfaces
share the pin_pol register,
So not support hdmi_pin_pol here is correct.
hdmi pin pol would be set by following register:
.pin_pol = VOP_REG(RK3288_DSP_CTRL0, 0xf, 4),
on rk3036:
[ 12.389138] rockchip-vop 10118000.vop: Warning: not support global_regdone_en
[ 12.397324] rockchip-vop 10118000.vop: Warning: not support gate
[ 12.404165] rockchip-vop 10118000.vop: Warning: not support gate
[ 13.747361] rockchip-vop 10118000.vop: Warning: not support hdmi_pin_pol
[ 13.747371] rockchip-vop 10118000.vop: Warning: not support hdmi_en
[ 13.747379] rockchip-vop 10118000.vop: Warning: not support hpost_st_end
[ 13.747385] rockchip-vop 10118000.vop: Warning: not support vpost_st_end
[ 13.747461] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
[ 13.767098] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
[ 13.786060] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
While reqdone and friends are obviously features of newer vops, at least
the hdmi pin-pol is available on both these socs.
With this patch applied (and null-ptr fixed) I end up without hdmi output
on both socs.
Hmmm, I am confused, from code review, I didn't see what will cause hdmi not
work on rk3036 and rk3288,
Give me some time, I try to bringup my popmetal rk3288 board to do the test.
Heiko, Thanks very much for your test.
Heiko
_______________________________________________
Linux-rockchip mailing list
linux-rockc...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
Ｍark Yao
