From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
This patch adds support to set_sysclk() which can let the sound
card driver to set default mclk rate. In this case MCLK for
internal audio codec is expected to be at 9.6MHz by default.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
sound/soc/codecs/msm8916-wcd-digital.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/soc/codecs/msm8916-wcd-digital.c
b/sound/soc/codecs/msm8916-wcd-digital.c
index f690442..825cc7d 100644
--- a/sound/soc/codecs/msm8916-wcd-digital.c
+++ b/sound/soc/codecs/msm8916-wcd-digital.c
@@ -568,6 +568,15 @@ static int msm8916_wcd_digital_codec_probe(struct
snd_soc_codec *codec)
return 0;
}
+static int msm8916_wcd_digital_codec_set_sysclk(struct snd_soc_codec *codec,
+ int clk_id, int source,
+ unsigned int freq, int dir)
+{
+ struct msm8916_wcd_digital_priv *p = dev_get_drvdata(codec->dev);
+
+ return clk_set_rate(p->mclk, freq);
+}
+
static int msm8916_wcd_digital_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -823,6 +832,7 @@ static struct snd_soc_dai_driver msm8916_wcd_digital_dai[]
= {
static struct snd_soc_codec_driver msm8916_wcd_digital = {
.probe = msm8916_wcd_digital_codec_probe,
+ .set_sysclk = msm8916_wcd_digital_codec_set_sysclk,
.component_driver = {
.controls = msm8916_wcd_digital_snd_controls,
.num_controls = ARRAY_SIZE(msm8916_wcd_digital_snd_controls),
--
2.9.3
