Hi Shawn, Please see my explanation inline.
> -----Original Message----- > From: Shawn Guo [mailto:shawn...@kernel.org] > Sent: Thursday, August 03, 2017 9:40 AM > To: Andy Tang <andy.t...@nxp.com> > Cc: mark.rutl...@arm.com; devicet...@vger.kernel.org; > catalin.mari...@arm.com; will.dea...@arm.com; linux- > ker...@vger.kernel.org; robh...@kernel.org; linux-arm- > ker...@lists.infradead.org > Subject: Re: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support > > On Wed, Jul 26, 2017 at 03:24:53PM +0800, andy.t...@nxp.com wrote: > > From: Yuantian Tang <andy.t...@nxp.com> > > > > ls2088a supports another cpu idle state which is pw20 which saves more > > power when cpu is idle. > > It was implemented through psci firmware. > > > > Signed-off-by: Tang Yuantian <andy.t...@nxp.com> > > Can you explain a bit in the commit log why psci node is being added in fsl- > ls208xa.dtsi while you are only adding idle state for ls2088a? Does that mean > ls2088a and ls2080a gets different idle implementation? > IDLE implementation is same on both ls2080a and ls2088a. it is just there is no Requirement for ls2080a though. Still it is better to update both. I will resend the patch adding ls2080a supports. Regards, Andy > Shawn > > > --- > > arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++ > > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +++++ > > 2 files changed, 22 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > index 5c695c6..6aa319d 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > @@ -53,6 +53,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x0>; > > clocks = <&clockgen 1 0>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster0_l2>; > > #cooling-cells = <2>; > > }; > > @@ -62,6 +63,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x1>; > > clocks = <&clockgen 1 0>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster0_l2>; > > }; > > > > @@ -70,6 +72,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x100>; > > clocks = <&clockgen 1 1>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster1_l2>; > > #cooling-cells = <2>; > > }; > > @@ -79,6 +82,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x101>; > > clocks = <&clockgen 1 1>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster1_l2>; > > }; > > > > @@ -88,6 +92,7 @@ > > reg = <0x200>; > > clocks = <&clockgen 1 2>; > > next-level-cache = <&cluster2_l2>; > > + cpu-idle-states = <&CPU_PW20>; > > #cooling-cells = <2>; > > }; > > > > @@ -96,6 +101,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x201>; > > clocks = <&clockgen 1 2>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster2_l2>; > > }; > > > > @@ -104,6 +110,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x300>; > > clocks = <&clockgen 1 3>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster3_l2>; > > #cooling-cells = <2>; > > }; > > @@ -113,6 +120,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x301>; > > clocks = <&clockgen 1 3>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster3_l2>; > > }; > > > > @@ -131,6 +139,15 @@ > > cluster3_l2: l2-cache3 { > > compatible = "cache"; > > }; > > + > > + CPU_PW20: cpu-pw20 { > > + compatible = "arm,idle-state"; > > + idle-state-name = "PW20"; > > + arm,psci-suspend-param = <0x00010000>; > > + entry-latency-us = <2000>; > > + exit-latency-us = <2000>; > > + min-residency-us = <6000>; > > + }; > > }; > > > > &pcie1 { > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > index 94cdd30..205b7f7 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > @@ -118,6 +118,11 @@ > > interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ > > }; > > > > + psci { > > + compatible = "arm,psci-0.2"; > > + method = "smc"; > > + }; > > + > > soc { > > compatible = "simple-bus"; > > #address-cells = <2>; > > -- > > 2.1.0.27.g96db324 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-ker...@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
