From: Soren Brinkmann <soren.brinkm...@xilinx.com>
Document the DT bindings for the Zynq UltraScale+ PM Firmware.
Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
.../devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644
Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
new file mode 100644
index 000000000000..222a18ce07fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
@@ -0,0 +1,19 @@
+Xilinx Zynq MPSoC Firmware Device Tree Bindings
+
+The zynqmp-pm node describes the interface to platform firmware.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-pm"
+ - method: The method of calling the PM-API firmware layer.
+ Permitted values are:
+ - "smc" : To be used in configurations without a hypervisor
+ - "hvc" : To be used when hypervisor is present
+ - interrupts: Interrupt specifier
+
+Examples:
+ zynqmp-firmware {
+ compatible = "xlnx,zynqmp-pm";
+ method = "smc";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
--
1.9.1
